Trailer Wiring Compatible with 2015 Honda Odyssey

Question

Question:

my trailer connector part number C56378. Will this kit work on my 2015 Odyssey?

asked by: Mike R

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56378 is a fit for 2011 - 2017 Honda Odyssey models. It will fit your 2015 Odyssey and will connect behind the driver's side trim panel.

expert reply by: Jason S

0

Answer 1

The Curt T-Connector Vehicle Wiring Harness #C56378 did not have compatibility with a backup camera when the video was made. You can see in that video that it lacks the additional connection with the white wire that it now comes with. This was added…

view full answer...

Answer 2

The best way to determine if the module on your Curt T-Connector #C56378 for your 2014 Honda Odyssey is bad is to use a circuit tester like part #PTW2979 to check the wiring on the input side of the module and then the output side of the module. If…

view full answer...

Answer 3

The Curt T-Connector Vehicle Wiring Harness part #C56378 is a fit for a 2012 Honda Odyssey with or without backup cameras or sensors so you won't have any issues. There isn't a version of this harness for models with or without backup cameras…

view full answer...

Answer 4

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56378 has the second white quick connect and wire to give you the backup camera function. It is a through wire to allow that system to function correctly according to my…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...