Fit of Draw-Tite # 41932 Class IV Receiver Hitch on 2000 GMC Sierra 2500LD

Question

Question:

Purchased 41932 hitch for 2000 G.M.C. 2500LD club cab short bed will it fit ?????

asked by: jim m

0

Expert Reply:

According to Draw-Tite, their Class IV receiver hitch part # 41932 is indeed a fit for the 2000 GMC Sierra 2500LD truck, as long as your truck has the OEM bumper and brackets.

To see installation details, click the provided link.

expert reply by: DeAnne T

0

Answer 1

The Curt #C15323 installs to the underside of the frame members as shown in the provided diagram. You'll want to make sure the rear frame members where the hitch would install are still sound. Some surface rust is normal, but if it's any…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C15323 will fit on your 2005 Chevrolet Silverado 1500. This receiver is designed to fit the standard factory bumper but does not screw into the bottom of the bumper.

view full answer...

Answer 3

The 2 bolts that go into the bumper portion of the Curt Trailer Hitch Receiver #C14332 are a required part of the installation. Curt will void any warranty on the hitch if it is not installed properly as per their instructions. There is no way to…

view full answer...

Answer 4

Thanks for the photo! I can now see the issues you are having trying to install a trailer hitch on your 2019 Forest River Rockwood Ultra Lite Fifth Wheel. That said, the brackets for the Adjustable Width Trailer Hitch Receiver part #13703 and the…

view full answer...

Answer 5

According to B&W, their #BWHDRH25217 Class V hitch is indeed a fit for a 2009 Chevy Silverado 1500, regardless of bed length. If you click the provided link, you can see a video showing the hitch being installed on a 2008 Silverado.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Fit of Draw-Tite # 41932 Class IV Receiver Hitch on 2000 GMC Sierra 2500LD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching