Trailer Hitch Installation - 2003 Chevrolet Silverado - Curt Video

I'm assuming you mean you have a 63" gap between the two frame beams which would allow you to use the Curt Adjustable Width Trailer Hitch Receiver for RVs #C13704. The mounting brackets for this hitch can be installed on the bottom…

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

When it comes to a front mount trailer hitch receiver for your 2003 Chevrolet Silverado 1500 Light Duty Series 4x4, we only have one option, but it is a good one. The Curt #31302 is a confirmed fit and a solid choice for your Silverado. I have…

I have attached the installation instructions for the Curt Front Mount Trailer Hitch Receiver, #31084, on a 1999 Jeep Cherokee. The link to the instructions is located on the right of this page.

The air dam does need to be trimmed (or removed) to install front mount trailer hitch #65009. The skid shield, if present, would have to be removed. I have included a link to the installation instructions for this hitch so you can see the…

Due to the design of the front of your 2005 Chevy Silverado 3500 the only place you'll be able to have a front hitch opening is below the front fascia like where the Curt #31108 installs. This would be best option we have, but if you really…

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the…

The 2007 Chevy Silverado Classic 2500 requires a different front mount trailer hitch. From Curt, you can use #31108. I spoke with my contact at Curt and from the bottom of the frame rail to the bottom of the receiver on the hitch once installed is 5…

Unfortunately, the frame with isn't the only consideration. According to Draw-Tite, the differences in the way the front bumper, fascia and grill are situated in regard to the front of the frame members on a 2007 Classic versus a 2007 New Body…

Sounds like you have a boat trailer that you tow your Triton 21RX with that has surge brakes that are locking up in reverse. This is a fairly common scenario that has an easy fix. With surge brakes, you have a brake actuator applying the needed…

This type of question is always challenging due to the amount of varying opinions, different experiences, and lack of controlled environment with set standards. Please keep in mind that Castle Rock is an economy trailer tire so they will not perform…

According to Draw-Tite, their Class IV receiver hitch part #41932 is indeed a fit for the 2000 GMC Sierra 2500LD truck, as long as your truck has the OEM bumper and brackets. To see installation details, click the provided link.