Fit of B&W BWHDRH25217 Class V Trailer Hitch on 2009 Chevy Silverado 1500

Question

Question:

Will this work on my 2009 1500 Silverado short bed?

asked by: Kent S

0

Expert Reply:

According to B&W, their # BWHDRH25217 Class V hitch is indeed a fit for a 2009 Chevy Silverado 1500, regardless of bed length.

If you click the provided link, you can see a video showing the hitch being installed on a 2008 Silverado.

expert reply by: Mike L

0

Answer 1

There are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are…

view full answer...

Answer 2

Yes, the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25217 will fit as a replacement for your factory hitch as long as your 2006 Silverado 1500 has a standard factory bumper. The hitch will come with installation instructions that include the…

view full answer...

Answer 3

The B and W Hitch part #BWHDRH25187 does fit your 2003 GMC Sierra 2500HD and will give you the additional drop you are wanting since it is normally used on trucks with drop bumpers.

view full answer...

Answer 4

The B&W hitch #BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch #C15323, see video. Curt has a Class…

view full answer...

Answer 5

According to Draw-Tite, their Class IV receiver hitch part #41932 is indeed a fit for the 2000 GMC Sierra 2500LD truck, as long as your truck has the OEM bumper and brackets. To see installation details, click the provided link.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Fit of B&W BWHDRH25217 Class V Trailer Hitch on 2009 Chevy Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching