Height of Center Post of Swagman S64650 XC Bike Rack

Question

Question:

How high is the middle bar for i want to use it for front mount in vw bus

asked by: Paul

0

Expert Reply:

The upright of the Swagman # S64650 XC bike rack measures 29 inches tall from the center of the bracket to the end cap and 26 inches from the top of the bracket to the end cap, as shown in the provided photo.

If you use the provided link, you can see a product demonstration video featuring the Swagman XC bike rack.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Swagman XC 2-Bike Rack #S64650 weighs 25 pounds and has a shipping weight of 29 pounds. The overall width of the rack is 56 inches wide, and it can accommodate bikes with wheel bases up to 51-1/2 inches. The ratcheting upright measures 29…

view full answer...

Answer 2

I called my contact at Hollywood Racks, and he confirmed that the dimensions of the Hollywood Racks Trail Rider Bike Rack #HR200Z when off the hitch and folded are 9 inches wide x 39 inches tall from the bottom of the shank to the top. I went ahead…

view full answer...

Answer 3

We have a rack that is compatible with 5-inch-wide tires like your fat bike it is the RockyMounts MonoRail Solo Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount #RKY10007-05. This is a really solid bike rack too that…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...