Trailer Hitch Receiver Fit on 2020 Hyundai Venue

Question

Question:

Would there happen to be a trailer hitch receiver that fits a 2020 Hyundai Venue by chance? Thanks!

asked by: Les E

0

Expert Reply:

You'e in luck as there is a trailer hitch receiver that is a fit for a 2020 Hyundai Venue, which is the following:

- Curt Trailer Hitch Receiver # C57CR

This is a Class I hitch with a 1-1/4 inch receiver, and is a complete bolt-on installation with no drilling needed. It also has a really nice concealed look, as you can see from the accompanying photo, so your '20 Venue will maintain it's aesthetic. I have added a link to the installation instructions for you to check out as well.

If you plan on using this for a bike rack you will need a Class I rack like the Thule Helium 2 Bike Rack # TH44VR or Malone RunWay 2-Bike Platform Rack # MPG2149. I have added a link to our entire selection of Class I-compatible bike racks for you to take a look at.

Or, if you plan on doing some light towing with this vehicle there are some other parts you'll need, which are the T-Connector Vehicle Wiring Harness # C89CR, Ball Mount # C45521, Pin and Clip # F-4, and depending on the size of your trailer's coupler either 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82.

expert reply by: Kyle S

0

click to enlarge

Answer 1

As you can see of the photo I added for you, the crosstube will be totally concealed on your 2024 Hyundai Venue after installing the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C57CR I also wanted to add,…

view full answer...

Answer 2

Yes, there is a hitch available for a 2023 Hyundai Venue. It is the Curt Trailer Hitch item #C57CR. This hitch is custom fit and bolts to your Hyundai with included hardware. The Curt Trailer Hitch item #C57CR is a class I hitch with a 1-1/4"…

view full answer...

Answer 3

For your 2021 Hyundai Venue I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C57CR which is confirmed to fit your vehicle, and will not require any drilling or trimming to the fascia of your vehicle. The #C57CR is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...