bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # C57CR
Our Price: $229.83
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C57CR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (20)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C57CR

  • 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 200 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Hitches assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



11609-92 Curt Class 1 Trailer Hitch Receiver

Installation Details C57CR Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C57CR

Average Customer Rating:  4.7 out of 5 stars   (20 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

by:

The hitch is top quality but the UPS bring the product box in pretty bad shape and some scrash in the hitch assembly.

Etrailer Expert

Jenny N.

4/21/2022

I will have our Customer Service team reach out to you. I recommend touching up the affected areas with a rust resistant paint which you will then have on hand for regular hitch maintenance.

Orlando L.

4/15/2023

Still working perfectly. Great product AAA+++



by:
Hyundai

This hitch fits perfectly on our 2020 Hyundai Venue. The installation instructions were also very easy to follow and we completed the installation in about an hour.
Im not sure the step to remove the three push pins for the bumper in step 3 was necessary, especially the center one as it winds up directly behind the hitch bar and is difficult to re-install after the hitch is bolted in place.



by:

Arrived 1 day early. Will buy from etrailer agin



by:

I am very happy with my hitch. I have had no problems with it since I had it installed.



by:

i wish i was able to return it. not because its a bad product but i bought a truck so I never had it installed or has it been used. eventually ill buy another for my santa cruz.



by:

Heavy duty, good fit. Looks good.



by:

Great delivery. Good product



by:
2022 Hyundai Venue

Worked great, thanks!!



by:
Hyundai

just wanted to say how great everyone was . t had the hitch installed and ir tool only 45 minutes all went good thanks. was for a 2921 hyundai venue



by:

Easy install, instructions good, fit pe rfectly.



by:
2022 Hyundai Venue

Excellent fit. Easy install . Directions said to remove exhaust hanger, this was unnecessary. On my 2022 Hyundai venue



by:

The representative was very helpful and informative and took my order personally to speed up the process. I was pleasantly surprised that my order arrived within just a few days.

Frank

9/25/2021

The hitch is holding up fine. I have taken several trips with 2 bikes on my rack with no issues.



by:

Very fast shipping.



by:



by:



by:



by:



by:
2023 Hyundai Venue



by:
2022 Hyundai Venue



by:


20
20

See what our Experts say about this CURT Trailer Hitch

  • Correct Trailer Hitch for a 2021 Hyundai Venue
    The Curt Trailer Hitch Receiver part # C57CR is a confirmed fit for a 2021 Hyundai Venue. It offers an easy bolt-on install. It has a class I rating with 1-1/4" receiver tube opening. It can be used for both towing as well as bike racks and cargo carrier. If you have any other questions please just let me know.
    view full answer...
  • Do They Make a 2" Trailer Hitch for a 2023 Hyundai Venue
    The only trailer hitch options for a 2023 Hyundai Venue are class I, 1-1/4" like the Curt Trailer Hitch Receiver part # C57CR which is what I recommend. That said, you can convert this to a 2" hitch using an adapter like the Trailer Hitch Receiver Adapter part # e43YR or part # e93YR. Please note, using said adapter will reduce the hitch capacity by 50%. Unfortunately, the Hyundai Venue is a subcompact so they don't make the larger hitch size for this as the vehicle can't benefit from...
    view full answer...
  • How to Transport Two Bikes with 2020 Hyundai Venue
    There's a great solution for transporting bikes with your 2020 Hyundai Venue, but the only hitch option for your vehicle is the Curt Class I Receiver Hitch # C57CR. This is a great hitch as it's durable and can support up to 200 lbs of tongue weight, which is more than enough to transport a bike rack and two standard bikes. The only downside is that it only has a 1-1/4" receiver, which limits the number of accessories that can be used with it. If you need a recommendation for a bike rack...
    view full answer...
  • Trailer Hitch Receiver For a 2023 Hyundai Venue To Carry a Power Wheelchair
    The only size receiver we have for your 2023 Hyundai Venue is the Curt Trailer Hitch Receiver # C57CR which you found. This has a 1-1/4" receiver opening. It is also limited to a tongue weight up to 200lbs so your power wheelchair and the Carrier # C18110 would have to come in under 200lbs.
    view full answer...
  • Swagman Chinook Bike Rack for Curt Class I Hitch
    I checked our website and Swagman's and got the same information. While both the capacity of the Swagman XC2 bike rack item # S64650 and the Curt trailer hitch item # C57CR are within capacity, and will mechanically work together, Swagman says it needs to used on a minimum Class 2 hitch receiver. On some of the older hitches there was a metal piece welded into the rear of the 1 1/4" receivers. This was done so you couldn't insert the 1 1/4" bike rack into the 1 1/4" hitch receiver. The...
    view full answer...
  • Locking Hitch Pin for Swagman Bike Rack
    The Curt Trailer Hitch Receiver item # C57CR you referenced does not require fish wire to feed bolts through. It is a very straight forward and simple installation. I have linked the instructions below for you. Your Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches item # S64650 has a locking hitch pin and bike lock combo. It is the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks w/ 1-1/4" & Combo Shanks - 7' item # S64031. This 1/2" hitch pin locks your bike rack to your...
    view full answer...
  • Which is Better Hitch for 2022 Hyundai Venue Curt or Draw Tite
    Both the Draw Tite # DT24MR and the Curt # C57CR are great hitches for your 2022 Hyundai Venue but the better option is the Curt as it does not require fascia trimming like the Draw Tite does. Aside from that you wouldn't notice much of a difference between install or use of either.
    view full answer...
  • Trailer Hitch Receiver Fit on 2020 Hyundai Venue
    You'e in luck as there is a trailer hitch receiver that is a fit for a 2020 Hyundai Venue, which is the following: - Curt Trailer Hitch Receiver # C57CR This is a Class I hitch with a 1-1/4 inch receiver, and is a complete bolt-on installation with no drilling needed. It also has a really nice concealed look, as you can see from the accompanying photo, so your '20 Venue will maintain it's aesthetic. I have added a link to the installation instructions for you to check out as well. If...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch 2022 Hyundai Venue
    Yes, we do have a hitch for your 2022 Hyundai Venue. I suggest the Curt Trailer Hitch Receiver, # C57CR. This is an easy bolt-on install. It is a class I rated hitch, 1-1/4" receiver opening and can be used for both towing as well as bike racks and cargo carrier. If you plan on using this for towing, you will need the T-Connector Vehicle Wiring Harness, # C89CR, a ball mount, # C45521, the Pin and Clip # F-4, and depending on the size of your trailer's coupler either 1-7/8" Hitch Ball...
    view full answer...
  • 2022 Hyundai Venue Trailer Hitch that Does not Require Heat Shield Modification
    The Curt hitch part # C57CR that you referenced does not require modification of the heat shield to install on your 2022 Hyundai Venue unlike the Draw Tite part # DT24MR that also fits your vehicle. So if you were looking for a hitch that does not require heat shield modification the Curt is the way to go.
    view full answer...
  • What Tools are Needed to Install Curt Hitch # C57CR
    In the attached install instructions for the Curt hitch part # C57CR that you referenced a list of the needed tools is listed and you'll need a ratchet, torque wrench, 3/4 inch drive socket, slot screwdriver, 12 mm socket, and 13 mm socket.
    view full answer...
  • 2022 Hyundai Venue Trailer Hitch, Bike Rack, and Cargo Carrier Recommendations
    The trailer hitch I recommend for your 2022 Hyundai Venue is the Curt Trailer Hitch Receiver # C57CR, which is a Class I hitch with a 1-1/4" receiver and a thicker powder coat than the other hitch options for your vehicle. If you already have a bike rack and cargo carrier system then it's likely for a 2" receiver and their aren't any custom 2" receivers available for your vehicle so you'd have to have one fabricated. If you don't already have a cargo carrier/bike rack setup, then I recommend...
    view full answer...
  • Recommended Hitch for a 2023 Hyundai Venue
    Yes, there is a hitch available for a 2023 Hyundai Venue. It is the Curt Trailer Hitch item # C57CR. This hitch is custom fit and bolts to your Hyundai with included hardware. The Curt Trailer Hitch item # C57CR is a class I hitch with a 1-1/4" receiver. It is made in the USA and weighs 29 lbs. This hitch has a 2,000 lbs towing capacity and a 200 lbs maximum tongue weight. If you plan on towing you will also need the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258...
    view full answer...
  • Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube
    As you can see of the photo I added for you, the crosstube will be totally concealed on your 2024 Hyundai Venue after installing the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver # C57CR I also wanted to add, in case you were going to be doing some towing and need a trailer wiring harness, the correct fit for your '24 Venue is the T-Connector Vehicle Wiring Harness # C89CR.
    view full answer...
    Image 1 for
  • Best Trailer Hitch Receiver For 2021 Hyundai Venue
    For your 2021 Hyundai Venue I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C57CR which is confirmed to fit your vehicle, and will not require any drilling or trimming to the fascia of your vehicle. The # C57CR is made right here in the USA so you know it is a quality product, and in our experience the powder coat finish on the Curt hitches are the most durable keeping the hitch looking great for years to come. If you can tell me what you are planning on...
    view full answer...
    Image 1 for
  • Trailer Hitch & Wiring Harness For 2024 Hyundai Venue
    We do have both a trailer hitch receiver as well as 4-way wiring harness for your 2024 Hyundai Venue, with the correct part numbers being the following: - Curt Trailer Hitch Receiver # C57CR - T-Connector Vehicle Wiring Harness # C89CR I went ahead and verified both fits directly with the manufacturer for you.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.