Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube

Question

Question:

just wondering if the Curt trailer hitch that fits the 2024 hyundai venue has a concealed crosstube?

asked by: Robert M

0

Expert Reply:

As you can see of the photo I added for you, the crosstube will be totally concealed on your 2024 Hyundai Venue after installing the Curt hitch that fits, which is the following part number:

- Curt Trailer Hitch Receiver # C57CR

I also wanted to add, in case you were going to be doing some towing and need a trailer wiring harness, the correct fit for your '24 Venue is the T-Connector Vehicle Wiring Harness # C89CR.

expert reply by: Kyle S

0

Curt Trailer Hitch C57CR on Hyundai Venue
(click to enlarge)

Answer 1

You'e in luck as there is a trailer hitch receiver that is a fit for a 2020 Hyundai Venue, which is the following: - Curt Trailer Hitch Receiver #C57CR This is a Class I hitch with a 1-1/4 inch receiver, and is a complete bolt-on…

view full answer...

Answer 2

Yes, there is a hitch available for a 2023 Hyundai Venue. It is the Curt Trailer Hitch item #C57CR. This hitch is custom fit and bolts to your Hyundai with included hardware. The Curt Trailer Hitch item #C57CR is a class I hitch with a…

view full answer...

Answer 3

In the attached install instructions for the Curt hitch part #C57CR that you referenced a list of the needed tools is listed and you'll need a ratchet, torque wrench, 3/4 inch drive socket, slot screwdriver, 12 mm socket, and 13 mm socket.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...