Installing a Brake Controller in a 2007 Hummer H3
Question:
trying to hook up on a 2007 H-3 Hummer. Looked for the panel under the dash according to the spec drawing for that model and not seeing what is shown on the drawing. Thanks
asked by: Larry U
Expert Reply:
Your 2007 Hummer H3 should have four or five blunt cut wires under the left side of the instrument panel to the left of the steering column. You should see a bundle that contains a red wire with a black stripe, a white wire, light blue wire with a white stripe, a dark blue wire and possibly an orange wire.
The bundle could be above the emergency foot brake, behind the plastic kick panel or above the brake pedal. This bundle of wires is what is used to hook up the electrical lead wires coming off the back of a brake controller. I will include a link to a page to a brake controller help page that has a chart on how to match the wire colors. You may need to cut off the plastic connector at the end of the wires because your vehicle will not use a plug-in style connector.
I have attached two help articles that should help you when installing the brake controller in your vehicle as well as an installation video. The vehicle and brake controller in the video is different, but it should help you locate the wire bundle under the dash and give you an idea how to connect the brake controller.
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Demco Classic Base Plate Kit - Fixed Arms
- Shop: Hayes Engage Trailer Brake Controller - 1 to 3 Axles - Time Delayed
- Shop: Brake Buddy Classic 3 Portable Flat Tow Brake System - Preset
- Q&A: Using Demco Classic Base Plate Kit on 2006 Hummer H3 with Blue Ox Avail Tow Bar
- Shop: Blue Ox Ascent Non-Binding Tow Bar - RV Mount - 2-1/2" Hitch - 7,500 lbs
- Shop: Saris MHS Platform Rack Base for 1 Bike and Accessory - 1-1/4" and 2" Hitches - Tilting
- Shop: Demco Commander II Non-Binding Tow Bar for Blue Ox and Curt Base Plates- RV Mount- 2" Hitch-6K
- Shop: Trailer Wiring
- Shop: Curt Rambler Non-Binding Tow Bar - RV Mount - 2" Hitch - 7,500 lbs
- Q&A: Installing a 7-Way Trailer Connector and Brake Controller on 2007 Hummer H3
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installation of 4-Way and 7-Way Trailer Wiring Harness on a H3 Hummer
- Q&A: Adapter Hose Needed To Connect A Weber Q1200 To A 2019 Jayco Jay Feather Travel Trailer
- Article: How (and Where) to Connect an RV Propane Grill
- Search Results: brake controller
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Video: Curt Spectrum Trailer Brake Controller Review
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2006 Dodge Ram Pickup
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Video: Review of Blue Ox Tow Bar - Acclaim Non Binding Tow Bar - BX4330
- Video: Choosing the Right Brake Controller
- Search Results: tow bar
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: supplemental brake
- Search Results: supplemental braking system
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Search Results: etbc7
- Search Results: 7 pole trailer connector
- Search Results: weatherproof wire connectors
on Trailer Brake Controller
