Does the Tekonsha P3 Trailer Brake Controller Turn Off or Stay On All the Time
Question:
I received my controller and cable today super quick service, and put it in with no problems. The display on the P3 remains lit, even with the truck shut off. Is that normal? Is there a way to turn it off?
asked by: Michael L
Expert Reply:
The P3 brake controller, # 90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off, walk away for 15 minutes or so, then come back and peek in through the window to see if it has turned off. Of course you could always unplug the controller if you wanted.
If it has not, there may be a wiring issue or something causing the controller to think there is a trailer attached and drawing power. Corrosion in the vehicle/trailer side connectors could cause a short that would keep the brake controller on. I have included a link to an FAQ article that covers other aspects of brake controller troubleshooting.
If the controller not turning off is happening with the trailer connected, then there could also be an issue with the trailer brake magnets. I have included another FAQ that covers testing brake magnets for you.
If you are using the OEM cable, make sure that you have it attached to the correct wires on the brake controller. Some factory harnesses have an illumination function that is not used by aftermarket controllers. On a brake controller, the white wire is ground, black is 12 volt power, blue is output to the trailer brakes, and red is input from the brake switch.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: brake controller
- Shop: A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: Vehicle Cargo Control
- Shop: Fifth Wheel Hitch
- Shop: Roof Rack
- Search Results: 90195
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - GM
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2022 Jeep Wagoneer
- Search Results: crossbars
- Search Results: trailer jack
- Video: Review of Surco Products Adapter for Surco Safari Roof Racks - SPCH100
- Search Results: 3020~p
- Video: Rightline Truck Bed Tent Review RL110710
- Video: B and W Fifth Wheel Installation Kit - Custom - BWGNRK1313-5W Review
- Video: B and W 5th Wheel Trailer Hitch Installation - 2004 Dodge Ram Pickup
- Video: Curt Custom Fifth Wheel Hitch Kit Installation - 2022 Ram 2500
- Video: Choosing the Right Brake Controller
- Q&A: Recommended Trailer Tire Size and Load Range for a 14K Tandem Axle Horse Trailer
- Search Results: 16 tires
- Search Results: apparel
- Q&A: Converting a 4-Way Trailer Connector to a 7-Way on a 2014 Toyota FJ Cruiser
on Trailer Brake Controller
