Horse Trailer Wall Pad Compatibility with Plywood Backing

Question

Question:

Would it be easy to remove staples along back to then wrap around edges of plywood backing? The original pads I will be replacing appear done in that manner.

asked by: Cat

0

Expert Reply:

The Horse Trailer Side Pad - 60" # HTP1260BK will allow you to remove staples from the cardboard backing and wrap the cover around plywood as you referenced. You will simply want to be careful in removing the staples so you don't damage the durable black vinyl.

expert reply by: Jason S

0

Answer 1

In order to install the the Horse Trailer Side Pad - 60" #HTP1260BK you just need to screw them in. What you'll need are the Trailer Horse Pad Screw #PS-8 and attach them to the sides of the pad.

view full answer...

Answer 2

Yes, the 60" Horse Trailer Side Pad #HTP1260BK is essentially a universal option so you can install it wherever you're wanting to as long as you have the space for it. You'll need to pick up #8 x 3/4" sized screws for this…

view full answer...

Answer 3

The TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7730 or the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box #TLA7726 are ideal for the mount style and location you need. If you want a metal box, then I…

view full answer...

Answer 4

The PS-8 screws should work very well going into either material you mentioned. The threads are coarse enough that they'll get good hold on the aluminum or the rubber. For best results, you'll want to ensure that as many screws as possible go…

view full answer...

Answer 5

We don't offer replacement horse trailer side pads in custom sizes, but for a larger size than the part #HTP40BK you would want the part #HTP60BK as this one is 60 inches long instead of 40 inches like the #HTP40BK.

view full answer...

Answer 6

We have added the 60" X 12" Pad #HTP1260BK since the particular answer page you found was made. We do have the 40" X 9" Pad #HTP40BK and 60" X 9" Pad #HTP60BK. These are all made by Redline with Redneck Trailer Supply…

view full answer...

Answer 7

Though we do have the Horse Trailer Side Pad #HTP1260BK that is 60" x 12", the widest 40" option we have will only be 9" ( #HTP40BK). What is going to be your best bet is to go with the Horse Trailer Escape Door Pad #HTP12BK,…

view full answer...

Answer 8

They are different in width. Aside from that and price everything else is the same. The Horse Trailer Side Pad item #HTP1260BK measures 60" long x 12" wide x 2" thick. The Horse Trailer Side Pad item #HTP60BK measures 60" long x…

view full answer...

Answer 9

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I recommend using at…

view full answer...

Answer 10

The Horse Trailer Side Pad - 60" #HTP1260BK does not come with the hardware needed to install, although we do carry it. All you need is the Trailer Horse Pad Screw #PS-8 and you're set. The screws will install around the edges of the pad to…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Horse Trailer Wall Pad Compatibility with Plywood Backing

Product Page this Question was Asked From

Continue Researching