Can 60" Horse Trailer Side Pad Be Installed on Trailer Side Instead of Divider

Question

Question:

Can the 60” x 12” pad be used on the trailer side rather than the divider?

asked by: Marci R

0

Expert Reply:

Yes, the 60" Horse Trailer Side Pad # HTP1260BK is essentially a universal option so you can install it wherever you're wanting to as long as you have the space for it.

You'll need to pick up #8 x 3/4" sized screws for this installation.

expert reply by: Jon G

0

Answer 1

The Trailer Horse Pad Screw #PS-8 will allow you to install the 60" Horse Trailer Side Pad #HTP1260BK on your steel trailer/divider. This screw is 3/4" long and will require a 1/8" pilot hole on your steel trailer. I…

view full answer...

Answer 2

In order to install the the Horse Trailer Side Pad - 60" #HTP1260BK you just need to screw them in. What you'll need are the Trailer Horse Pad Screw #PS-8 and attach them to the sides of the pad.

view full answer...

Answer 3

Though we do have the Horse Trailer Side Pad #HTP1260BK that is 60" x 12", the widest 40" option we have will only be 9" ( #HTP40BK). What is going to be your best bet is to go with the Horse Trailer Escape Door…

view full answer...

Answer 4

The Horse Trailer Side Pad - 60" #HTP1260BK will allow you to remove staples from the cardboard backing and wrap the cover around plywood as you referenced. You will simply want to be careful in removing the staples so you don't…

view full answer...

Answer 5

We have added the 60" X 12" Pad #HTP1260BK since the particular answer page you found was made. We do have the 40" X 9" Pad #HTP40BK and 60" X 9" Pad #HTP60BK. These are all made by Redline with…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 11

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 12

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Can 60" Horse Trailer Side Pad Be Installed on Trailer Side Instead of Divider

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching