What Type of Roof Bike Racks Can Attach to Yakima Jetstream Bars

Question

Question:

What roof top bike racks work with yakima jetstream bars? Are they considered elliptical bars? Thanks!

asked by: Amy E

1

Helpful Expert Reply:

The Yakima Jetstream crossbars have a track that runs on top of them which means that bike racks that can fit aero/elliptical bars and bars with tracks on top will fit fine. For that we have the Thule Outride # TH75JV for a fork mount style or the # TH599000-FB for a style that attaches to the front wheel.

expert reply by: Jameson C

1

Answer 1

The Thule UpRide roof bike rack part #TH599000 that you referenced does fit the top channels of the Yakima Jetstream crossbars. So this bike rack with the Yakima roof rack part numbers #Y00432-0433 and you'd be set!

view full answer...

Answer 2

Between the Yakima HighRoad #Y02114 and Thule UpRide #TH599000 wheel-mount roof bike carriers I give the nod to the Yakima because it has two complete wheel hoops rather than one hoop and a clamp. This mounting method means more support the entire…

view full answer...

Answer 3

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 4

I do have a few options for you to carry a recumbent trike on your SUV. The first option would be to use the SeaSucker Roof Bike Rack for Trikes #298-BD1005. You will simply need to place the Vacuum Cups in the appropriate places on your roof and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...