Recommended Biker Bar for Harley Davidson Road Glide and Ultra Classic

Question

Question:

Does a 2016 Harley Road Glide special use the same bar as a 2010 Harley ultra classic? Are all of the base lock plates the same?

asked by: Morris

0

Expert Reply:

If you have a Harley Davidson Road Glide then I can confirm the B&W Biker Bar Motorcycle Tie-Down System for Trailers part # BWMC2301 will work which also fits the Harley Davidson Ultra Classic.

expert reply by: Conner L

0

Answer 1

I have contacted B&W and the biker bar compatible with the 2018 Harley-Davidson Touring bikes like the 2018 Road Glide is part #BWMC2301. The B&W Biker Bars can be mounted to an open or enclosed trailer floor with the included…

view full answer...

Answer 2

I checked with B and W to find out how to tell the two Biker Bars you have apart and they told me that the #BWMC2301 has black pads where it grabs the frame and the part #BWMC2302 has gray pads. While she didn't specify what the overall…

view full answer...

Answer 3

Congratulations on your new motorcycle! I contacted B&W and the 2020 Harley Davidson Touring Road Glide will work with the B&W Biker Bar Motorcycle Tie-Down System for Trailers part #BWMC2301 without a problem.

view full answer...

Answer 4

Yes, the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 is the correct system for both your 2016 Ultra Limited(FLHTK) and 2021 Road Glide Special(FLTRXS). It fits all FL Touring models Harley Davidson motorcycles. Your 2014 CVO…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...