Is B&W Biker Bar BWMC2301 Compatible With A 2020 Road Glide Bike

Question

Question:

I purchased the first biker bar in Michigan in 2015 installed it in my 2015 21ft enclosed trailer the bar was used on my 2003 road glide worked great now I have a 2009 C.V.O ROAD GLIDE AND WAS TOLD THAT IT WILL WORK ON THAT BIKE. AND NOW IM THINKING ABOUT BUYING A 2020 ROAD GLIDE WILL THAT SAME BIKER BAR WORK ON THAT BIKE ?

asked by: Jeff G

0

Expert Reply:

Congratulations on your new motorcycle! I contacted B&W and the 2020 Harley Davidson Touring Road Glide will work with the B&W Biker Bar Motorcycle Tie-Down System for Trailers part # BWMC2301 without a problem.

expert reply by: Heather A

0

Answer 1

If you have a Harley Davidson Road Glide then I can confirm the B&W Biker Bar Motorcycle Tie-Down System for Trailers part #BWMC2301 will work which also fits the Harley Davidson Ultra Classic.

view full answer...

Answer 2

Yes, the B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 is the correct system for both your 2016 Ultra Limited(FLHTK) and 2021 Road Glide Special(FLTRXS). It fits all FL Touring models Harley Davidson motorcycles. Your 2014 CVO…

view full answer...

Answer 3

The B&W Biker Bar Motorcycle Tie-Down System #BWMC2301 will work great with your Road King FLHR that has the rear air suspension just as long as your frame tubing diameter is 1-1/8-inches or 1-1/4-inches and that tubing is spaced apart 10-inches…

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 5

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...

Answer 6

Because the B&W Biker Bar #BWMC2301 is height adjustable, it provides you with the ability to move the bar up or down in 1/4" increments. It looks like the lowest setting is 3-3/4" and the highest setting is 6-1/2" inches-so if…

view full answer...

Answer 7

First of all that's a pretty sweet looking bike! Secondly, while there are no B&W Biker Bar systems specifically designed for your Indian Chieftain, you still might be able to utilize the Tie-Down System #BWMC2301. I've attached a photo…

view full answer...

Answer 8

The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson #BWMC2301 fits the Street Glide models like your 2022.

view full answer...

Answer 9

Thanks for the pictures. The tag does help narrow it down. It appears you have a pair of 2,500 lb axles on your trailer. This means we are likely dealing with an axle with a straight spindle that uses an Inner and outer bearing L44643 (1" inner…

view full answer...

Answer 10

The D in 205/75D15 represents that the tire has a bias ply construction whereas the R in 205/75R15 represents that the tire has a radial ply construction. The difference between a bias and radial ply is in regard to the directions of the cords. In…

view full answer...

Is B&W Biker Bar BWMC2301 Compatible With A 2020 Road Glide Bike

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching