Which Rackem Grass Catcher will Work on my 42" Toro Z Turn Lawn Mower

Question

Question:

I have a Toro.z turn 42 inch z series

asked by: Randy

0

Expert Reply:

We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part # RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part # RCMMS4-EXS1-TORO if it uses the standard deck use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part # RCMMS4-EXS1.

There is an extension available for it as well to reduce the dump frequency with the Extension for Rack'em Multi-Mount Grass Catcher part # RLES25

expert reply by: Randy B

0

Answer 1

Based on my research your Toro mower does have a standard deck, so you do have the correct grass catcher: - Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1

view full answer...

Answer 2

Yes the Rack'em Multi-Mount Grass Catcher #RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this. I attached an install video for this for more…

view full answer...

Answer 3

For your Dixon Ultra 52 you would need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 with the bracket kit part #RB-FPEX and you'd be set.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I checked with Rack'em and the Grass Catcher part #RCMMS4 is a fit for your Ariens IKON XD-52.

view full answer...

Answer 6

We have a Rackem' catcher that will work but the RCMMS4-OBS1 is not designed for that mower. Instead you will use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part #RCMMS4-EXS1.

view full answer...

Answer 7

The Rack'em Multi-Mount Grass Catcher part #RCMMS4 works with any riding lawn mover where the discharge opening is even with or extends out further than the mower's rear wheel. If so, then you'd need to make a custom face…

view full answer...

Answer 8

The correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1.

view full answer...

Answer 9

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but…

view full answer...

Answer 10

When it comes to installing a grass catcher on your Ariens Ikon XD The Rack'Em Multi-Mount Grass Catcher - Aluminum and Stainless Steel #RCMMS4 will work for you. The faceplate is sold separately #RA54FR. I attached a review video link…

view full answer...

Answer 11

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need #RCMMS4-EXS1 or if it's 5 inches, use…

view full answer...

Which Rackem Grass Catcher will Work on my 42" Toro Z Turn Lawn Mower

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching