Rack 'em Grass Catcher for Toro Timecutter 75750

Question

Question:

I was wondering if there is a grass catcher for a 75750? Thank you

asked by: Francisco

0

Expert Reply:

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use # RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4 inch tall discharge you'd use # RCMMS4-EXS1.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck part #RCMMS4-EXS1-TORO will fit all Toro Lawn Mowers with a Z-Cut Deck. I don't have reference to the deck type on any one particular model but have attached a photo of the Z-Cut…

view full answer...

Answer 2

Measure the discharge opening of your Exmark Viking Hydro and you'll know which of the two grass catchers is what you need. If you have a 4 inch discharge opening you need the part #RCMMS4-EXS1 or if you have a 5 inch opening you'd want the…

view full answer...

Answer 3

The Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 that you referenced is a fit for the Bob Cat mower you sent a picture in of. Since your Bob Cat has a standard dock that discharges even with the rear tires this will…

view full answer...

Answer 4

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1. The Z deck has notches or slots in it as…

view full answer...

Answer 5

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 6

You are correct about the catcher for your Scag Freedom SMFZ-48. The correct catcher is the Rack'em Grass Catcher for Scag Lawn Mower with Standard Deck #RCMMS4-OBS1. I have added a link to a video review as well.

view full answer...

Answer 7

Since your Toro Timecutter does not have the Z cut deck the Grass Catcher you'd need is the part #RCMMS4-EXS1.

view full answer...

Answer 8

I looked into this before and from what I found your TimeCutter Zero Turn Mower does not have the Z-cut deck so the Rack'em Grass Catcher #RCMMS4-EXS1-TORO would fit and work well. You can verify this by measuring the height of the opening and if…

view full answer...

Answer 9

The Rack'em Grass Catcher for Toro Lawn Mower with Z-Cut Deck #RCMMS4-EXS1-TORO will fit your 52 inch Toro Z mower deck if it has the Z-cut deck. If you have the regular deck then you will use #RCMMS4-EXS1 instead. The best way to determine that…

view full answer...

Answer 10

If your Toro Timecutter has the Z cut deck that extends out further than the rear wheel, you'd use the Rack 'Em #RCMMS4-EXS1-TORO catcher. If you have the regular deck, you'd use #RCMMS4-EXS1.

view full answer...

Answer 11

So normally for a Wright Stander mower you'd want the RackEm grass catcher part #RCMMS4-BS2 and for the Toro 52 grandstand you'd want the #RCMMS4-EXS1-TORO. What you could do is use the #RCMMS4 which fits both as the main catcher assembly and…

view full answer...

Answer 12

Your Toro Timecutter should have the Z-Cut deck. I have attached a picture below so you can confirm. You will want the Rack'Em Grass Catcher for Toro Lawn Mower with Z-Cut Deck item #RCMMS4-EXS1-TORO. The custom face plate provides the connection…

view full answer...

Rack 'em Grass Catcher for Toro Timecutter 75750

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching