Grass Catcher for Dixon Ultra 52

Question

Question:

Do you have an option or plate for the Dixon ultra 52?

asked by: Bruce G

1

Helpful Expert Reply:

For your Dixon Ultra 52 you would need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower # RCMMS4-EXS1 with the bracket kit part # RB-FPEX and you'd be set.

expert reply by: Jameson C

1

Answer 1

Yes the Rack'em Multi-Mount Grass Catcher #RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this. I attached an install video for this for more info…

view full answer...

Answer 2

We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part #RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower…

view full answer...

Answer 3

Based on my research your Toro mower does have a standard deck, so you do have the correct grass catcher: - Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 6

If your Toro Titan HD has a regular deck you need the #RCMMS4-EXS1. If you have the Z-Cut deck you need the #RCMMS4-EXS1-TORO instead. If your deck isn't one of these two you could still use the Rack'Em Multi-Mount Grass Catcher #RCMMS4 but…

view full answer...

Answer 7

I checked with Rack'em and the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mowers part #RCMMS4-EXS1 will fit an Exmark Metro with 36" deck. It also fits the models with a 48" and 52" deck.

view full answer...

Answer 8

The Rack'em Multi-Mount Grass Catcher part #RCMMS4 works with any riding lawn mover where the discharge opening is even with or extends out further than the mower's rear wheel. If so, then you'd need to make a custom face plate (pretty…

view full answer...

Answer 9

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need #RCMMS4-EXS1 or if it's 5 inches, use #RCMMS4-EXS15. Each…

view full answer...

Answer 10

The #RCMMS4-EXS15 Rack'em Grass Catcher is compatible with your Exmark mower with a 5 inch tall discharge opening. This catch will only fit if the discharge opening extends out even with or past the face of the rear wheel. The extension is part…

view full answer...

Answer 11

Yes, the Rack'em Grass Catchers like the one for Exmark Lawn Mowers part #RCMMS4-EXS15 can pickup grass, leaves, and other small yard debris.

view full answer...

Grass Catcher for Dixon Ultra 52

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching