How To Confirm Fit of the Rack'em Multi-Mount Grass Catcher

Question

Question:

I need to know if this catcher fits in my walking behind snapper pro 52 inches

asked by: Alejandra C

0

Expert Reply:

The Rack'em Multi-Mount Grass Catcher part # RCMMS4 works with any riding lawn mover where the discharge opening is even with or extends out further than the mower's rear wheel. If so, then you'd need to make a custom face plate (pretty easy) and you would be good to go.

expert reply by: Conner L

0

Answer 1

We have a Rackem' catcher that will work but the RCMMS4-OBS1 is not designed for that mower. Instead you will use the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower part #RCMMS4-EXS1.

view full answer...

Answer 2

For a 48 inch Bad Boy Zero Turn the correct grass catcher is the part #RCMMS4-EXS1.

view full answer...

Answer 3

I checked with Rack Em and for your BadBoy MZ Magnum you'd want the part #RCMMS4-EXS1.

view full answer...

Answer 4

Yes the Rack'em Multi-Mount Grass Catcher #RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this. I attached an install video for this for more…

view full answer...

Answer 5

The mower-specific bracket is included with the #RCMMS4-EXS1 catcher. This particular catcher fits Toro lawn mowers with a regular deck, Exmark lawn mowers with 4" discharge opening and Bobcat lawn mowers with a regular deck. I've…

view full answer...

Answer 6

I checked with Rack'em and for your 2013 Snapper Pro with a 61 inch deck you'd need the part #RCMMS4-OBS1 with the bracket part RB-DP that you can only get from them directly.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

How To Confirm Fit of the Rack'em Multi-Mount Grass Catcher

Product Page this Question was Asked From

Continue Researching