Needing Rack 'Em Grass Catcher for Exmark Zero Turn Mower

Question

Question:

I am in my late 50s and in need of a grass catcher that is not super heavy. I have a 48 ExMArk Zero Turn mower. Any suggestions? Thanks!

asked by: Greg

0

Expert Reply:

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall.

If it's 4 inches, you'd need # RCMMS4-EXS1 or if it's 5 inches, use # RCMMS4-EXS15.

Each catcher weighs right about 30 lbs.

expert reply by: Mike L

0

Answer 1

The #RCMMS4-EXS15 Rack'em Grass Catcher is compatible with your Exmark mower with a 5 inch tall discharge opening. This catch will only fit if the discharge opening extends out even with or past the face of the rear wheel. The extension is part…

view full answer...

Answer 2

Yes, the Rack'em Grass Catchers like the one for Exmark Lawn Mowers part #RCMMS4-EXS15 can pickup grass, leaves, and other small yard debris.

view full answer...

Answer 3

I checked with Rack'em and the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mowers part #RCMMS4-EXS1 will fit an Exmark Metro with 36" deck. It also fits the models with a 48" and 52" deck.

view full answer...

Answer 4

If your Toro Titan HD has a regular deck you need the #RCMMS4-EXS1. If you have the Z-Cut deck you need the #RCMMS4-EXS1-TORO instead. If your deck isn't one of these two you could still use the Rack'Em Multi-Mount Grass Catcher #RCMMS4 but…

view full answer...

Answer 5

The Rack'em Grass Catcher for Scag Lawn Mower with Velocity Deck #RCMMS4-OVBS1 comes with the faceplate you need along with all hardware needed for installation. The extension you are seeking is the Extension for Rack'em Multi-Mount Grass…

view full answer...

Answer 6

The correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

When it comes to installing The Timbren Rear Suspension Enhancement System #TFRRGR on your 2020 Ford Ranger they come in a pair. The Timbren springs has a 6,000 pound weight capacity, and no drilling is required during the installation. I attached an…

view full answer...

Answer 10

I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part #MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have attached a photo below with this as well.

view full answer...

Answer 11

Mad-Ramps states that the part #MR54FR is best suited for ATVs/UTVs with one row of seats but if the width of your golf cart is less than 60 inches and the wheel base is less than 88 inches this would work for you.

view full answer...

Answer 12

The newer Ford trucks feature what's dubiously referred to as a 'smart' trailer connector. The connector won't send any power back on the 12-volt accessory circuit (which powers the Echo) until the vehicle is turned on, the…

view full answer...

Needing Rack 'Em Grass Catcher for Exmark Zero Turn Mower

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching