Will Rack'em Multi-Mount Grass Catcher # RCMMS4 Fit 2018 Snapper 360Z

Question

Question:

will it fit a 2018 snapper 360z 52 cut

asked by: Blake

0

Expert Reply:

Yes the Rack'em Multi-Mount Grass Catcher # RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this.

I attached an install video for this for more info for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For a 48 inch Bad Boy Zero Turn the correct grass catcher is the part #RCMMS4-EXS1.

view full answer...

Answer 2

I checked with Rack Em and for your BadBoy MZ Magnum you'd want the part #RCMMS4-EXS1.

view full answer...

Answer 3

The Rack'em Multi-Mount Grass Catcher part #RCMMS4 works with any riding lawn mover where the discharge opening is even with or extends out further than the mower's rear wheel. If so, then you'd need to make a custom face plate (pretty…

view full answer...

Answer 4

We offer 2 different Rack 'Em grass catchers for Exmark mowers. The catcher you need will depend on if the discharge chute is 4 or 5 inches tall. If it's 4 inches, you'd need #RCMMS4-EXS1 or if it's 5 inches, use #RCMMS4-EXS15. Each…

view full answer...

Answer 5

The Rack'em Multi-Mount Grass Catcher #RCMMS4 does fit your Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this. I attached an install video for this for more info for you to…

view full answer...

Answer 6

We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part #RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower…

view full answer...

Answer 7

Based on my research your Toro mower does have a standard deck, so you do have the correct grass catcher: - Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1

view full answer...

Answer 8

For your Dixon Ultra 52 you would need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 with the bracket kit part #RB-FPEX and you'd be set.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

view full answer...

Answer 11

Hey Tony, the correct Rack Em Grass Cather for your Toro Grandstand 52 is the part #RCMMS4-EXS1-TORO.

view full answer...

Answer 12

The correct Grass Catcher for your Scag Liberty Z48 is the part #RCMMS4-OBS1.

view full answer...

Will Rack'em Multi-Mount Grass Catcher # RCMMS4 Fit 2018 Snapper 360Z

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching