Review of Rackem Landscaping Tools - Opening Bracket Plate - RB-FPEX Video

Yes, since your Scag Liberty has a Z cut 52 inch deck the correct RackEm grass catcher is the part #RCMMS4-OBS1.

We have a couple of options depending on your deck. While the Rack'em Multi-Mount Grass Catcher part #RCMMS4 is part of it you need the face plate to match. If your Toro uses the Z-Cut deck use the Rack'em Grass Catcher for Toro Lawn Mower…

Yes the Rack'em Multi-Mount Grass Catcher #RCMMS4 does fit your 2018 Snapper 360Z as I was able to find pictures of the discharge opening and found that it's a compatible design with this. I attached an install video for this for more info…

For your Dixon Ultra 52 you would need the Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1 with the bracket kit part #RB-FPEX and you'd be set.

Based on my research your Toro mower does have a standard deck, so you do have the correct grass catcher: - Rack'em Grass Catcher for Toro, Bobcat, and Exmark Lawn Mower #RCMMS4-EXS1

Since your Toro has the Z-Cut Deck you definitely want to go with the Rack'em Grass Catcher #RCMMS4-EXS1-TORO over the part #RCMMS4-EXS1. I'm not sure when or why Toro puts the Z-Cut Deck on different mowers but according to your picture that…

Justin, Thank you for the photo. You can use the Rack'em Multi-Mount Grass Catcher - Aluminum and Stainless Steel part #RCMMS4 with the Rack'em Face Plate part #RMBS2 for the Hustler Raptor SDX according to Rack Em. There will not be any…

The correct catcher will depend on the discharge opening behind that deflector shown in your photo. If it has the deck with a Z-bracket as shown in the provided photo, you'd use #RCMMS4-EXS1-TORO. If it doesn't have the z-slot, but has a 4…

The grass catcher that fits your Husqvarna EZ48 is the #RCMMS4-EXS1 with the #RB-FPEX filler plate.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…