Which Curt Hitch Fits 2004 Nissan Frontier

Question

Question:

I have A 2004 Nissan frontier Dessert runner XE-V6 3.3L says my truck model IS BLPGEA-EUN Trim k its the 2 door 2WD IT SAYS THE 13900 FITS my truck and it seems like it will but it also seems like it wont not without drilling another hole our to depending on Wich existing hole I chose to use. If the three holes I have one of them is a good 1-1 1/4 inch its fricken huge my hitch only come with bolts and a fish wire. So my thought was A. A Big washer well three to keep it level or a shackle top and bottom to negate the size of the holes Wich are the ones as far back as you can go before the bumper brackets start/just before the end of the frame. Your knowledge and experience, recommendations would be very much appreciated

asked by: David B

0

Expert Reply:

We do have Curt hitches that fit your 2004 Nissan Frontier but the 13900 is not one of them. Instead you'd want the # 13841 for if you have a short bed or the # 13842 for if you have a long bed. I confirmed with Curt these fit your truck and do not require any drilling.

expert reply by: Jameson C

0

Answer 1

From what I was able to learn, the connection point for the Hopkins Plug-in Simple Brake Wiring Adapter - Nissan, #HM47635, can be found underneath and left of the steering column, taped to another harness near the emergency brake pedal. There should…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 7

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 12

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Which Curt Hitch Fits 2004 Nissan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching