Replacement C-Shaped Spacers for Reese Above Bed Base Rails

Question

Question:

am I able to purchase the spacer kit only? As that is the only thing that I am missing

asked by: Damon

0

Expert Reply:

It sounds like you are looking for the Replacement Hardware Kit for Reese 5th Wheel Base Rails part # RP58504 which comes with everything that you need to secure a set of above bed base rails to a set of frame brackets. That said, we don't offer just the c-shaped spacers sold separately.

expert reply by: Conner L

0

Answer 1

The Reese Elite hitches do not have a set of legs that can replace what they come with to allow them to fit above-bed rails like you mentioned. If you wanted a similarly rated fifth wheel hitch that does fit above bed rails I would recommend the Curt…

view full answer...

Answer 2

We have exactly what you are looking for to mount a 5th wheel hitch in your 2019 Ford F-150. The correct 5th wheel base rails and install brackets that fit your truck are the following: - Curt Custom Fifth Wheel Installation Kit for Ford #C93WR

view full answer...

Answer 3

The correct Reese base rail kit that fits your 1994 Ford F-150 is part #RP30035 and it comes with the base rails, mounting brackets, and all of the hardware that you need. If you happen to already have the base rails then you need the kit with the…

view full answer...

Answer 4

The two rail hardware kits #RP58504 and the #RP58430 basically fit the rail kits. One includes lock nuts ( #RP58430 ) whereas the #RP58504 does not. But both are listed as fits for same rail kits. Worth mentioning though is #RP58504 comes with Grade…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...