Are 5th Wheel Rails Needed for a Sliding Hitch

Question

Question:

If I get a BandW patriot sliding hitch, do I still need the bed rails to mount it?

asked by: Andrew R

0

Expert Reply:

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need # DM8552016-71 for your 2006 Dodge Ram.

expert reply by: Bryce D

0

Answer 1

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 2

The best fixed fifth wheel hitch we offer for your 2019 Ford F-250 with the factory fifth wheel prep package is the USA B and W Companion Hitch part #BWRVK3200. The Companion hitches are widely regarded as the best fifth wheel hitches on the market…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 10

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

You can use the Curt E16 fifth wheel hitch part #C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part #C47BR which converts the pucks to the rail kit style this hitch needs.

view full answer...

Are 5th Wheel Rails Needed for a Sliding Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching