Recommended Frame Mount Camper Tie-Downs for a 2020 Chevy Silverado 1500

Question

Question:

I need to know if these will fit the newer body style Chevy 1500?

asked by: Jared B

0

Expert Reply:

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Chevrolet Silverado 1500 Crew Cab or Double Cab is part # TLC2224 for the front and part # TL54FR for the rear if you have dual exhaust or part # TLC3220 if you have single exhaust. If you also need turnbuckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.

expert reply by: Conner L

0

Answer 1

Thanks for the photo, and since your Ford has TorkLift frame-mounted tie-downs that measure 41 inches to the bed, the turnbuckles you will need are going to be from TorkLift. The reason for that is there are no HappiJac turnbuckles that that amount…

view full answer...

Answer 2

Yes, we do offer the TorkLift Custom Frame-Mounted Camper Tie-Downs part #TL54FR which is a fit for a 2019 Chevrolet Silverado 1500 with 5-3/4' or 6-1/2' bed.

view full answer...

Answer 3

The closest modern tire size to a 7.00-15 tire is a 225-75-15 like the #AM10256 tire you mentioned. Typically, a 225/75-15 tire will measure about 8-3/4 to 9 inches wide by around 28-1/2 inches in diameter. We offer the same size in a Load Range E…

view full answer...

Answer 4

The Titan Hitch Box Extension and Reducer for 2-1/2" Trailer Hitches, #RP45292, is a confirmed fit for your 2012 Chevrolet Silverado 2500 HD short bed with a Lance camper. This extension is specifically designed for your slide-in camper with…

view full answer...

Answer 5

The Reese Titan Extension/Reducer you referenced, part #RP45292 would work great with the 2-1/2 inch Class V hitch on your Ram. As you mentioned, the extension has a 8K capacity when cut down to the 24 inch length, that will provide a 2 inch…

view full answer...

Answer 6

There is a Titan hitch extender that should work for you, but would require a Titan hitch be installed on your truck to handle a tongue weight loaded that far from the hitch. It is Reese part #RP45292. You can use it as a 34 inch extension or cut…

view full answer...

Answer 7

You can use a 7-Way and 4-Way connector at the same time just as long as you are not overloading the light circuits. If your camper has a lot of outside lights like running lights, and brake/stop/turn lights then the lights that perform the same…

view full answer...

Answer 8

Your old Hydraulic Trailer Brake assembly #AKFBBRK-35L can use the Uni-Servo Wheel Cylinder #AKBRKR-H7-L-CR. These are corrosion resistant coated but not aluminum. Another option is to upgrade your entire assembly to the Hydraulic Brake Kit -…

view full answer...

Answer 9

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...