Hitch Recommendation for 2020 Toyota Tacoma

Question

Question:

It looks like you have 2 different receiver hitches for a 2020 Tacoma. I can't tell any difference between them. Is there any difference? What would you choose? Thank you.

asked by: Johnny D

0

Expert Reply:

You're correct, except for the fact that the # e98905 etrailer branded hitch uses a matte finish and the Curt # C13264 has a glossy finish, both hitches look alike and install in the same manner

The Curt and etrailer brand have an identical 900 lbs tongue weight/6000 lbs towing capacity. The actual capacity of your truck will vary according to the engine, transmission and rear differential gearing, so you'll need to abide by whichever capacity is lower, be it the hitch or that of the vehicle itself.

I recommend the Curt Trailer Hitch item # C13264.

expert reply by: Mike L

0

Answer 1

The only plug-in-play trailer wiring harness available for a 2020 Toyota Tacoma is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56349 so that is what I recommend using. Next you will need a Curt 4-Way Flat to…

view full answer...

Answer 2

Yes, the etrailer Trailer Hitch Receiver #e98905 uses 1/2-13 x 1 3/4 carriage bolts to fit the existing holes in the bumper beam on your 2022 Toyota Tacoma. I've attached a link to the instructions as well as a clip from the instructions to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...