Correct 7-Way Trailer Wiring Harness for a 2020 Toyota Tacoma

Question

Question:

Does this harness fits the 2020 tacoma sr

asked by: Moisés

0

Expert Reply:

The only plug-in-play trailer wiring harness available for a 2020 Toyota Tacoma is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56349 so that is what I recommend using. Next you will need a Curt 4-Way Flat to 7-Way Socket Adapter # C26DR. This setup will connect with a brake controller which uses a part like the Curt Echo Wireless Brake Controller part # C51180. Don't forget the Mounting Bracket and Installation Hardware part # PK12711U.

The Hopkins Plug-In Simple Vehicle Wiring Harness won't work.

expert reply by: Conner L

0

Answer 1

You're correct, except for the fact that the #e98905 etrailer branded hitch uses a matte finish and the Curt #C13264 has a glossy finish, both hitches look alike and install in the same manner The Curt and etrailer brand have an identical 900 lbs…

view full answer...

Answer 2

The Replacement Vehicle Wiring Harness #22117 is a replacement harness for the factory 7-way on your 2017 Toyota Tacoma and is not a brake controller. Your boat trailer has a 7-pole adapter so you may already have a 7-way on your Tacoma; you would…

view full answer...

Answer 3

I reached out to my contact at Tekonsha regarding the OEM Replacement Vehicle Wiring Harness #22117. He said the kit was recently changed to include the 10 amp fuse to use if necessary on certain vehicles. You do not need to use the fuse and for the…

view full answer...

Answer 4

To use the Curt Echo Wireless Trailer Brake Controller #C51180 your vehicle only needs 12 volt, ground, and turn signals connected to its 7-way socket. What this means is you do not need the brake signal from the 7-way. For example, if you used a…

view full answer...

Answer 5

The way you currently have the system set up will work just fine for you. However, if you want to use the 12-volt accessory feed from your 7-way to maintain (not charge) the trailer mounted winch battery, the battery would indeed need to be grounded…

view full answer...

Answer 6

We have several wiring kits that may work well for you. I have attached a link to our product page for wiring kits we offer. You can use the filters on the page to find a wiring kit that will work for you. For example if you need a wiring kit 20 feet…

view full answer...

Answer 7

The Tekonsha OEM Replacement wiring part #22117 comes with three fuses. It comes with one 25 amp fuse and two 30 amp fuses. It also comes with 3 inline fuse holders. There should not be a 10 amp mini fuse with the kit. This Tekonsha harness is meant…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Correct 7-Way Trailer Wiring Harness for a 2020 Toyota Tacoma

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching