Curt Class III Trailer Hitch Installation - 2020 Toyota Tacoma Video

You are correct, the right brake controller harness for the 2020 Toyota Tacoma is indeed the #3031-P. The harness plugs into the white connector located behind the driver's side kick panel. I've provided a photo showing where the connector is…

You're correct, except for the fact that the #e98905 etrailer branded hitch uses a matte finish and the Curt #C13264 has a glossy finish, both hitches look alike and install in the same manner The Curt and etrailer brand have an identical 900 lbs…

Yes you do need a brake controller installed in your 2020 Toyota Tacoma to control the travel trailer's electric brakes as there isn't one installed in your truck from the factory and there's no other device that can actuate the brakes.…

The Thule Helium #TH44VR will accommodate the 2.40 inch width on your Giant Talon tires. Although, the Thule Helium fits a maximum wheel base of 50 inches and a wheel diameter of 26 inches - 29 inches. If you need a hitch for the Thule Helium, I…

Yes, we do have a hitch for your 2023 Toyota Tacoma. It is the Curt Trailer Hitch item #C13264. This hitch is custom fit and bolts to your Tacoma with included hardware. This is a class III hitch with a 2" receiver. It has a 7,000 lbs towing…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

For your 2018 Toyota Tacoma, there is the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks #Y01151-5768 that has 60 inch crossbars that will fit any factory utility tracks in the truck bed. The Yakima OverHaul HD Truck Bed…

I have attached for you below an install video of the Curt Trailer Hitch Receiver part #C13264 on a 2016 Toyota Tacoma. The front two attachment holes require fishwiring. This is standard procedure for hitch installation but the Tacoma can be tricky…

Yes, the Curt trailer hitch part #C13264 that you referenced does come with all of the install hardware needed. I attached a picture that shows all of the install hardware as well as an install video for more info on this as well.

Tongue weight has to do with the downward pressure being put on the hitch. With the etrailer.com hitch #e98905 having a maximum tongue weight of 900 pounds, it can technically handle a bike rack or cargo carrier combined with bikes or other gear…

We do carry a Curt hitch that will fit your 2020 Toyota Tacoma perfectly, which is the following: - Curt Trailer Hitch Receiver #C13264 This will fit all models of '20 Tacoma, and if you were also looking to do some towing with your truck and…

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the superior matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend #e98905 because the…