Diameter of the Trailer Valet JXC Trailer Jack # TV94FR Tube

Question

Question:

What is the diameter of the tube?

asked by: Merlin

0

Expert Reply:

The outer tube's outer diameter of the Trailer Valet JXC Trailer Jack # TV94FR is 2-1/4 inches and the inner tube's outer diameter is 2 inches.

expert reply by: Jameson C

0

Answer 1

The Trailer Valet JXC Trailer Jack part #TV94FR is what I recommend as a replacement trailer jack for a Forest River Oasis. This trailer jack has an easy to use sidewind handle but what I like most is that you can easily use a powered drill for…

view full answer...

Answer 2

The etrailer A-Frame Round Jack #TJA-5000S-B is a great sidewind jack. It is rated for 5,000lbs capacity and will extend to 24" below the mounting bracket. The Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter…

view full answer...

Answer 3

I do have an option for you but there isn't a drop leg available for the Trailer Valet JXC Trailer Jack part #TV54FR or part #TV94FR. If you're after faster operation or less work then you may want to take advantage of the drill powered…

view full answer...

Answer 4

According to Trailer Valet, their #TV94FR trailer jack can indeed be mounted so that the crank is on the side. I've linked to a product description video featuring the #TV94FR 5K trailer Jack.

view full answer...

Answer 5

There isn't any specific maintenance requirements for your Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV94FR, however I do recommend applying some grease #L11390 using the grease zerk you're looking at to lubricate…

view full answer...

Answer 6

The 5k weight capacity of the Trailer Valet JXC trailer jack part #TV94FR that you referenced is for the tongue weight of the trailer so your trailer being 10,000 lbs would be no issue as it would have a tongue weight of around 1,000 lbs. So this…

view full answer...

Answer 7

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option #TV94FR is made in China. If you are looking for a manual jack with 5,000lb rated capacity that is made in the USA we have the A-Frame Trailer Jack by Dutton-Lainson #DL22772.…

view full answer...

Answer 8

If you can send me a photo of the trailer jack I would be more than happy to help you find a replacement, but unless the jack is still under warranty we won't be able to swap it outright with what came on your trailer when you purchased it.

view full answer...

Answer 9

The Trailer Valet #TV94FR has a 3000 lb lift capacity, so it'll handle a 1000 lb tongue weight easily. Trailer Valet doesn't recommend using an impact driver because the increased torque they deliver could dramatically shorten the lifespan of…

view full answer...

Answer 10

The Trailer Valet JXC trailer jack part #TV94FR will work great on your trailer and can be orientated so that it wouldn't interfere with the propane tank cover that you have as well.

view full answer...

Answer 11

The highest capacity trailer tire we offer that fits a 14 inch trailer rim is the Load Range D part #TTWTRTM2157514D which has a capacity of 2,200-lb max load at 65 psi. With trailer tires you have to keep them inflated to their max psi at all times…

view full answer...

Answer 12

With the Trailer Valet part #TV94FR basically you can use any 18 or 24 volt drill and you'll be fine. Cordless drills are generally rated by voltage and not weight so just make sure yours is at least an 18 volt model.

view full answer...

Diameter of the Trailer Valet JXC Trailer Jack # TV94FR Tube

Product Page this Question was Asked From

Continue Researching