Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, GMC owners. Today, on our 2021 GMC Canyon, we're gonna to be taking a look at and showing you how to install WeatherTech's rear mud flaps. And this is what the mud flaps look like installed at the rear of the vehicle. You can see here, it's gonna protect the back of your vehicle as well as anything you're hauling behind you, whether it be a trailer or an expensive camper or a boat. We don't wanna fling any of that dirt and debris and mud on there. So, it protects all those items, and it also minimizes just how much cleanup you're ever gonna have to do 'cause it's gonna collect all in here and you can just kind of give it a kick and spray that out and clean it up real fast.
The mud flaps are constructed of a flexible, yet durable, composite that's gonna have plenty of give. So, if you we're to catch any debris on the road, it can flex out of the way without causing any damage, but it has plenty of rigidness to it to catch dirt and debris and keep it from flying through and hitting your vehicle. It's also gonna be resistant against UV rays, dirt, debris, road grimes and oils, so you're gonna have long-lasting mud flaps here at the back that are gonna look great. These mud flaps are gonna be custom made for your Canyon, so they're gonna fit and look great, and there's no drilling required. As far as the installation goes, this is an extremely quick and easy upgrade that you could do at home probably in less than 10 minutes.
We'll begin our installation at the rear of our vehicle. We're gonna start on the driver's side. We first wanna make sure that we've cleaned up the area 'cause we don't wanna trap any dirt or debris behind our mud flaps. To install this mud flap, it's pretty easy. There are three attachment points there, we're gonna remove those with the included bit.
You wanna make sure you save this hardware because we are gonna reuse it upon installation of the mud flap. We can now take the mud flap that is labeled left hand and you can see that written right here, LH, since we're on the driver's side. It's just going to slide into position. Your old holes should line up with the holes in your mud flap where we'd removed those hardware. And then we'll take the included Allen key, while we're holding it in this position, we're going to push in on the screw here 'cause this mechanism on the back here, this little blade, is going to lock it in to the fender right there.
So, we're just pushing in and we're turning. And so, we feel it grab on the fender there. Once you've got it hooked, we can then just snug it down a little bit. That's just going to help keep this in place for us while we install the rest of our hardware. We can then reinstall our hardware that we had removed by passing through the holes in our mud flap, going right back into the factory holes. I like to start each one first before tightening 'em down to make sure that everything lines up. Now that we've got 'em all started, we can go back and tighten down our hardware, using the included tools. Once we've tightened these down, we'll perform the exact same procedures over on the other side to get that mud flap installed. And that completes our installation of WeatherTech's rear mud flaps on our 2021 GMC Canyon..
Average Customer Rating: 4.8 out of 5 stars (1383 Customer Reviews)
These premium mud flaps are easy to install and digitally designed to fit your car or truck. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Just like the description says...easy install, no drill, digital fit. Looks like they came with the truck. Highly recommend.
Did not fit well on the 2022 Dodge Ram 3500. The rear flaps did not quite fit the OEM fender flares on the vehicle. Too tight - not enough clearance to sit nicely against the flares. There was also no hole for the trim fastener so had to drill a 1/4" hole for little plastic fastener - not a big deal. Hoping the front ones fit better, but they were worse. Same story - the "digital fit" flaps did not fit the OEM fender flares. Tried a heat gun to hopefully warm the flap and maybe get them to fit together better, but couldn't quite get it. I'll need to get some longer fasteners, otherwise one bolt and the little plastic tab are all thats holding it on. Maybe if the weather warms a bit...? Def not as advertised.
Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
Fantastic product. Very easy installation. High quality. Very fast delivery! Etrailer is the best as always!
holes did not line up with pre existing holes on car
for installation. Very hard
to install. will NOT buy weathertec again
Delivery was quick. The mudflaps were very easy to install it took me about 15 minutes. Extremely happy with the way they look and no more rocks and debris flying up from my tires. Definitely recommend.
These mud flaps are great! Good Instructions and install went quickly. They look really good and should perform well, protecting the rocker panels and the side steps from mud and stones. Very pricey but good quality. Front Pair.
Took a little effort to get it to match up with the plastic wheel well fender flares but once I did I have not had any issues. Looks somewhat subtle but is pretty effective at stopping thrown debris onto the paint.
Great service item was shipped and received quickly. Mud flaps were easy to install.
For someone who is "old school" and reluctant to install plastic onto a machine, I'm impressed with the ease of installation and durability so far. I've put about 7500 miles on them without an issue. And thanks to Etrailer for carrying great products and providing great info to consumers. You folks have a great Business model!
I was apprehensive about buying these as the weather tech company said they would not fit. My vehicle has power running boards and 22” wheels..I researched forums and took a chance. They fit…no problem. See attached photos and video.
Thanks
Great product, easy to install, I didn't find the instructions, but was easy to figure out. I would recommend this product
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
I ordered Weather Tech mud flaps for my GMC Sierra 1500. The front flaps were easy to install by using existing fasteners installed on the truck by GMC. The rear flaps were slightly more challenging requiring the placement of clamps (integral to the flaps) on the rear fender. The entire installation of all flaps required about 45 minutes. they look great and they will protect my fenders from being damaged by road debris.
East install on 2023 Thor Compass 23te Motorhome. Fit perfectly. Place some tape on a open end wrench to hole the nut on and you are good to go.
Weather tech always fits and looks good
Good quality. Arrived quickly
Easy to install.
I ordered a set of weathertech no drill mud flaps for my new 2022 Colorado and they fit great and easy to install. Well after a couple of weeks I put on GM flares so I had to order another set for flares. Same thing excellent fit and easy install. Quick shipping and good service.
Fit my 2020 Honda Ridgeline perfect! Easy to install with easy to follow instructions. Match oem black plastic great. Really complete the look of truck. Very happy customer.
Seems like a solid product. Made in the USA. The instructions were a bit off. So I jumped on the etrailer YouTube account, found the install video. Issue solved. I will say I'm more impressed with etrailer than weathertech. However, nice fit and finish. I would recommend this product.
Good service and product from etrailer, and the mud flaps fit was exact, no issues and easy to install.
Easy to install great product
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Philip
4/16/2024
The product was easy to install and adds to the look of the truck. I would definitely purchase this product again for my next truck I purchase