A-Frame Mounted Tongue Jack With 5,000LB Capacity That is Made In The USA

Question

Question:

Where is it made?

asked by: Radford L

0

Expert Reply:

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option # TV94FR is made in China.

If you are looking for a manual jack with 5,000lb rated capacity that is made in the USA we have the A-Frame Trailer Jack by Dutton-Lainson # DL22772. This jack also has a black powder coat finish.

expert reply by: Bud M

0

Answer 1

The Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option, #TV94FR is a replacement. You will need to remove the Braber BE-130 Jack. The Trailer Valet, #TV94FR has an outer tube diameter of 2-1/4". My suggestion is to measure…

view full answer...

Answer 2

The etrailer A-Frame Round Jack #TJA-5000S-B is a great sidewind jack. It is rated for 5,000lbs capacity and will extend to 24" below the mounting bracket. The Drop Leg for etrailer and Ram Jacks - 13-1/4" Tall - 5-1/4"…

view full answer...

Answer 3

I do have an option for you but there isn't a drop leg available for the Trailer Valet JXC Trailer Jack part #TV54FR or part #TV94FR. If you're after faster operation or less work then you may want to take advantage of the drill…

view full answer...

Answer 4

The highest capacity trailer tire we offer that fits a 14 inch trailer rim is the Load Range D part #TTWTRTM2157514D which has a capacity of 2,200-lb max load at 65 psi. With trailer tires you have to keep them inflated to their max psi at all times…

view full answer...

Answer 5

Yes, you can replace your load range C tires with load range D tires without issue. It will only become any issue when you go down load ranges, not up. The tires will have the same overall diameter as long as they are the same size regardless of…

view full answer...

Answer 6

I'll start out by saying that the Goodyear Endurance tires that we carry are all radial tires, but we do not have any available in a 205/75R15. However, if you're looking for a bias ply tire with those measurements I recommend using the…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 10

On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…

view full answer...

Answer 11

Choosing the correct rear suspension enhancement for your 2022 Jeep Gladiator will depend on how much sag you are actually getting and if you want to have something that is adjustable or not. The SumoSprings Solo Custom Helper Springs #SS62XR will be…

view full answer...

Answer 12

Hey Dave, In my opinion the etrailer Invisible Base Plate Kit #e98948 is going to be the stronger option compared to the Blue Ox Base Plate Kit #BLU53FR. Blue Ox started adding safety cables to their baseplate kits as a last resort backup in the…

view full answer...