Will Installing Trailer Hitch on 2019 Ford Edge Titanium Stop Hands-Free Liftgate From Working

Question

Question:

If it is installed, are you still able to use liftgate - hands free? Want to add a bike hitch for travel

asked by: Lynn

0

Expert Reply:

Once installed, the Draw-Tite Class III # 75234 receiver hitch will slightly limit the areas under the bumper where the hands-free liftgate sensors can 'read' your foot passing under the bumper. The square receiver tube will block access in the middle of the under-bumper area, but the sensors will read just fine off to either side.

The hitch will work great on your vehicle, and be pretty inconspicuous as well. Most of the hitch is hidden behind the rear bumper fascia, so the only visible portion will be the receiver tube. If you'll be towing with the hitch, you'll need a few other items to complete your towing setup. You'll need the # 118805 trailer wiring harness, a ball mount like # C45070 and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch.

I've linked you to an install video for the # 75234 trailer hitch.

expert reply by: Mike L

0

click to enlarge

Answer 1

You are correct that Draw-Tite hitch #75234 will install on your 2019 Ford Edge Titanium with no vehicle modification. It will also offer the cleanest appearance since it has a hidden cross tube. Please refer to the linked photo to see the…

view full answer...

Answer 2

The Draw Tite hitch part #75234 is the most hidden trailer hitch for your 2020 Lincoln Nautilus. Only the hitch opening hangs below the rear bumper which will give you a mostly hidden look and will also help with ground clearance. I attached a…

view full answer...

Answer 3

I can understand your concern; thankfully, I can offer a couple solutions. The Draw-Tite Trailer Hitch Receiver #75234 states that only the Sport model of the Edge requires the heat shield to be removed permanently. However, when we installed it on…

view full answer...

Answer 4

I recommend the etrailer Trailer Hitch Receiver #e36RR for your 2018 Ford Edge SEL. This receiver has a hidden cross tube giving you a more OEM look. The matte black finish of the receiver will also match better with the rear bumper fascia being…

view full answer...

Answer 5

There is absolutely an option for you! The best roof rack for your 2018 Ford Edge with the Vista glass roof is the Rhino-Rack RS 2500 Roof Rack because it gives your car a rack that is extremely functional while maintaining a clean, refined look.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For your 2018 Ford Edge (Sport or non-Sport) the best hitch based on what you want is the Draw Tite part #75234. This hitch has a concealed crosstube which means only the hitch opening would hang down below the rear bumper. Check out the picture I…

view full answer...

Answer 8

The towing capacity of a 2018 Ford Edge Titanium with the 2.0L EcoBoost Engine is 3,500 lbs per the 2018 Ford Trailer Towing Guide. There are other models with a 2,000 lb towing capacity which have the 2.7L EcoBoost Engine. The length of the…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...