T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(24 reviews)
Price: $69.99
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Retail:$130.38
Our Price: $69.99
You Save: 46%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (24)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118805 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Item # 118805
Installation Details
This Product Fits The Following Vehicles
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Alternate product found
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118805
Average Customer Rating: 4.8 out of 5 stars (24 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Greg 02/04/2023
Fishing that cable up to the tail light is tougher than they make it look. I used a hole saw and punched a couple of holes in that plastic tray to get the wire up. You should also toss in 5 feet of loom to protect the wires under the car and the tywraps are too short to go around the hitch to secure them there. I had some of each. I also hit that lighter socket in the rear luggage compartment instead of running 15 feet of wire under the car.
by: Matthew05/08/2022
2022 Ford Edge
My trailer hitch and other items arrived a day before I actually needed them Speedy service knowledgeable staff had to call customer service because I accidentally ordered two of the same items this was taking care of immediately thank you play company also easy-to-use website and very helpful
Matthew
5/10/2023
All the items I ordered from E trailer Worked and performed as promised Instructional videos from etrailer super helpful
by: 08/13/2022
When product was received, some of the hardware was missing. etrailer quickly shipped the missing parts. Hitch and wiring fit perfectly. A really nice professional appearance for do-it-yourself install.
by: Doug 02/09/2024
Great hitch
by: Jack 06/23/2023
2020 Ford Edge
Good product. Installing trailer wiring will be challenging if you don't have a lift, but definitely doable.
by: Rich P.09/12/2019
Wiring kit for my 2019 Ford Edge was not as easy as others II have installed from etrailer.com on previous vehicles. But the difficulty had to do with the design of the Edge itself. Fishing the left and right connectors up the rear panels through a very limited space was very challenging, I watched the video provided and found it very helpful. I used a straightened wire clothes hanger as my fish line. Taping the connector harness to the fish wire as shown in the video did not work for me. Instead, I bent a tight hook shape at the end of my fish wire and rigged a string loop around one of the connectors. I hooked the string loop into the fish wire and taped it securely. It was then easier to pull the harness up through the body to the taillight assembly area. Did not have a tester to see if it all worked once installed. Drove 100 miles to pick up my trailer. All worked well when I connected the trailer harness to the Edge.
by: Luke 06/13/2021
2010 Ford Edge
Easy to follow instructions. I had to tape my bolts onto the spring leader so they wouldn’t fall out. Not a big deal. Also, this hitch mounts low on the 2020 edge so you may bottom out occasionally. Installation ease is about 7 out of 10. Took about 2-1/2 hours to install the hitch and the wiring harness.
by: Ryan08/29/2021
Harness works as promised. The only reason I even attempted the install was the video resources provided by etrailer. It was a bit difficult to route the wire to the battery as I was working in my driveway with no lift available but otherwise it was very straight forward. I’d highly recommend some trim tools to help loosen the panels as it makes the wiring much easier to pull through to the tail lights. Took a bit of time to route everything and get it tied out of the way but came out clean. As long as you have the patience and ability to fit under the car it’s a straight forward DIY install.
by: John B05/31/2020
Ford Edge
Trailer connector fit perfectly to my Ford Edge and has worked great whenever I tow my boat.
John B.
6/25/2021
The trailer wiring adapter has been working great with no issues since installing it. Thanks
by: Daniel 05/02/2021
2020 Ford Edge
The install was not as easy as I hoped. Also there was no mounting bracket for the 4 pin connector.
by: 12/27/2022
Ford Edge
went in a 2020 edge, perfect fit, easy install.
by: Launey10/02/2020
We received all of our orders but haven't put anything on as yet. things have came up and it will be little while before he actually gets them puts on our two vehicles
by: Richard 02/12/2024
by: Emily04/24/2022
Works perfect!
by: John K09/04/2020
Works great!
by: Donnell05/19/2023
by: Jonathan 06/15/2021
Good deal
by: Thomas 09/08/2022
by: Thomas 08/22/2022
by: Stephen10/18/2021
Was easy and very helpful
by: Shawn05/28/2022
by: Wayne 05/11/2021
2020 Ford Edge
by: Matt 03/03/2021
by: Ken 10/26/2021
24
24
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Vehicle Wiring Harness For 2020 Ford Edge SELTekonsha does make a vehicle wiring harness confirmed to fit your 2020 Ford Edge SEL. You will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805. The Tekonsha # 118669 you purchased is only confirmed to fit the 2015-2018 Ford Edge SEL or SE. I included a video of the # 118805 being installed on a 2020 Ford Edge SEL for you to take a look at.
view full answer... - Hands Free Lift Gate Operation on 2019 Ford Edge SEL or Titanium with Aftermarket HitchI've got great news! We have had no issues of the hitches available like the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 75234 causing any issues with the hands free lift gate. If anything it may not work directly under the receiver tube opening but to either side you will be good. If you haven't already found what you want I really like the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 75234 that I mentioned above...
view full answer... - 4-Way Trailer Wiring Harness Fit For 2022 Ford Edge STWe do indeed have the correct 4-way trailer wiring harness for your 2022 Ford Edge ST, which is a harness from Tekonsha, and is the following part number: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805 I verified with the manufacturer for you that this connector is a fit for your '22 Edge ST. It will mount on the outside of your Edge, so you'll also need a mounting bracket, the Mounting Bracket 4-Pole Flat # 18144.
view full answer... - Correct Trailer Wiring Harness for a 2019 Ford Edge STThe correct wiring for your 2019 Ford Edge ST is the T-One Vehicle Wiring Harness # 118805. This is the only wiring harness we've verified to work with the ST model. I also recommend picking up the brackets # 18144 and # 18140 so your 4-Way can be located next to your hitch receiver.
view full answer... - What Parts Do I Need to Trim to Install the Curt C13234 Hitch on a 2020 Ford EdgeYou won't need to trim the actual bumper when installing the Curt # C13234 on your 2020 Ford Edge, but there are some pieces of the heat shield panel and under body panels that do need to be modified slightly in order to allow for the installation of the hitch. These modifications can be done with a tin snips, so they're not too serious. If you fast forward to around the 8:00 mark of the installation video that I've attached, you can see this process in greater detail. If you're planning...
view full answer... - Difference In Tekonsha T-One Wiring Harnesses For a 2020 Ford Edge Titanium and Other TrimsThe tail light connectors are different on the 2020 Ford Edge Titanium from the other trims. You can see in the images I put below that the tabs off the connectors are in different places. The Curt T-Connector # C73FR for the Titanium has black connectors with the tabs at the corners. While the Tekonsha T-One # 118805 for other trims has tan connectors and the one tab is right next to the latching tab.
view full answer...
- Difference Between Curt 4-Way Wiring that Fits 2019 Ford Edge Titanium and Tekonsha for Non-TitaniumSince the difference between the 2019 Ford Edge Titanium and the other models is that the Titanium comes with LED taillights Tekonsha had to make a different kit with a different converter box that accommodates the difference in lighting. This is why the # C73FR fits the Titanium and the # 118805 fits the other models. Both of these are easy to install though. I attached an install video for the kit that fits your vehicle for you to check out as well.
view full answer... - Recommendations For Towing A Small Camper With 2020 Ford EdgeThere's a great hitch we sell for your 2020 Ford Edge called the etrailer class III 2" hitch # e36RR. This hitch has a tongue weight of 675 lbs and a max gross trailer weight of 4,500 lbs. Perfect for towing a small camper. I would refer back to the owners manual to find your specific vehicle's towing capacity and use the lowest rating between the vehicle and the hitch. Typically, the towing capacity for a 2020 ford edge is lower than the hitch towing capacity. I also recommend a...
view full answer... - Recommended Trailer Wiring Harness Fit for 2020 Ford Edge ST LineAccording to Curt, the # C73FR trailer wiring harness will only fit 2020 Ford Edge models in the Titanium trim. For all other trim levels including the ST Line, you'd use the Tekonsha # 118805. If you click the provided link, you can see an informational review video.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for Towing With 2023 Ford EdgeThere is a hitch available for your 2023 Ford Edge. I recommend the Curt Trailer Hitch Receiver # C13234. This Class III hitch has a 2" receiver and features a bolt-on installation. It has a max gross trailer weight of 4,000 lbs and comes with a lifetime warranty. For wiring, the most reliable option is the Tekonsha T-One Vehicle Wiring Harness # 118805. The T-connector plugs into existing wiring so no cutting or splicing is required. Once installed, you will have a 4-way to power your...
view full answer... - Wiring Harness Fit For 2019 Ford Edge ST With Curt Trailer HitchWe can get your 2019 Ford Edge ST set up with the right electrical wiring to add a 4-way, and for the ST model you will need the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805 I verified for you that this will fit the ST, and will work superbly for you with the Curt hitch you mentioned, the Curt Trailer Hitch Receiver # C13234. The only other thing I recommend is adding mounting brackets, the No-Drill Mount for Electrical Mounting Bracket # 18140...
view full answer... - Does Draw-Tite Trailer Hitch 75234 Fit 2021 Ford Edge Titanium & ST-LineIt was smart to check and I can verify for you that the Draw-Tite hitch you asked about does indeed fit both the 2021 Ford Edge Titanium and the 2021 Ford Edge ST-Line: - Draw-Tite Max-Frame Trailer Hitch Receiver # 75234 The # 75234 does have a really nice design, like you mentioned, with a concealed crosstube and only the receiver showing to keep the aesthetic of your '21 Edge in tact. The only other thing you may want if you are looking to do some towing is a wiring harness, with...
view full answer... - Does Heat Shield On 2021 Ford Edge Need To Be Removed To Install Curt Trailer Hitch C13234?You do not need to remove the exhaust heat shield on your 2021 Ford Edge to install the Curt Trailer Hitch # C13234 you were looking at. With that said you will need so cut a section of the underbody trim panel so that the hitch will fit correctly, and you can see Clayton trim this panel at the 5:45 minute mark of the included video. If you will be towing a trailer with your Edge you will also need a vehicle wiring harness # 118806 if you have a titanium model, or the # 118805 if you...
view full answer... - Will Installing Trailer Hitch on 2019 Ford Edge Titanium Stop Hands-Free Liftgate From WorkingOnce installed, the Draw-Tite Class III # 75234 receiver hitch will slightly limit the areas under the bumper where the hands-free liftgate sensors can 'read' your foot passing under the bumper. The square receiver tube will block access in the middle of the under-bumper area, but the sensors will read just fine off to either side. The hitch will work great on your vehicle, and be pretty inconspicuous as well. Most of the hitch is hidden behind the rear bumper fascia, so the only visible...
view full answer...
- Wiring Harness and Trailer Connector to Install Curt Echo on 2019 Ford EdgeTo install a Curt # C51180 Edge brake controller on your 2019 Ford Edge, you'd first need to install a 4 pole trailer wiring harness using part # 118805. Then to install the Edge, you'd use our # ETBC7L brake controller install kit which includes the 4 pole to 7-way adapter and the wire and circuit breaker necessary to make the power feed connection to the battery. I've linked to some installation and product demonstration videos that will assist you in the install process. The install...
view full answer... - Jet Ski Towing Set up for a 2021 Ford EdgeI would be happy to help you set up your 2021 Ford Edge to tow your jet ski. I recommend the Curt Trailer Hitch Receiver item # C13234. The hitch receiver will sit about a 1/2 inch higher from the ground compared to the similar Draw-Tite item # 75214 that is also available for your vehicle. I have attached a picture and a installation video so you can see what the final product looks like after installation. For your wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness...
view full answer...
- Will Trailer Hitch Receiver for 2020 Ford Edge Interfere With Camera on Lift GateInstalling a trailer hitch receiver on your 2020 Ford Edge will absolutely not interfere with a camera on the lift gate in any way at all. The best option for a hitch for your 2020 Edge is from Curt, because it is the easiest installation, the Curt Trailer Hitch Receiver # C13234. If you are going to be towing with your Edge and need a 4-flat wiring harness, the correct part will depend on if you have a Titanium model or not. - Non-Titanium: T-One Vehicle Wiring Harness with 4-Pole Flat...
view full answer... - Recommended Trailer Brake Controller for a 2022 Ford EdgeThe best type of trailer brake controller option we have for your 2022 Ford Edge is a wireless one. The reason that this is best is because it won't require you to splice into the vehicle wiring like you would normally for a traditional trailer brake controller. In order to use this type of brake controller you'll need to start with a 4-way if you don't already have one and for this I recommend the T-One Vehicle Wiring Harness part # 118805 (All Models Except Titanium). This will then need...
view full answer... - Parts Needed to Add Brake Controller to 2022 Ford Edge STWhile I can understand not wanting to splice any wiring, you'll have to do so to add a brake controller to your 2022 Ford Edge ST, as there isn't a plug-and-play brake controller option. So what you'll need are the following for the wiring: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805 - Universal Installation Kit for Trailer Brake Controller # ETBC7 You will first install the 4-flat, which will activate your trailer's lighting functions, and you'll then...
view full answer... - Will Curt Trailer Hitch Receiver 13452 Fit 2023 Ford EdgeYes, the Curt Trailer Hitch Receiver # C78KR (13452) is confirmed to fit your 2023 Ford Edge. This Class III hitch features a concealed cross tube and a bolt-on installation. It also comes with a limited lifetime warranty. If you plan on doing some towing you'll also need wiring. The most reliable option is the Tekonsha T-One Vehicle Wiring Harness # 118805. This plugs into the connection points behind your taillights and will provide you with a 4-way to power your trailer's signal lights....
view full answer... - No Drill Class III Trailer Hitch Fit for 2019 Ford Edge SELAccording to Draw-Tite, the # 75234 Class III hitch is a fit for all models of the 2019 Ford Edge with the exception of the Titanium model. This is a no-drill installation, but one small stud on the underside of the vehicle above the muffler will need to be cut off using a Dremel tool or die grinder. I've linked you to the installation instructions and an installation video showing the hitch being installed on a 2018 Edge. If you'll be towing with the hitch, you'll need a trailer wiring...
view full answer... - Which Hitch for 2019 Ford Edge Does Not Require Heat Shield RemovalI can understand your concern; thankfully, I can offer a couple solutions. The Draw-Tite Trailer Hitch Receiver # 75234 states that only the Sport model of the Edge requires the heat shield to be removed permanently. However, when we installed it on a 2018 Ford Edge Titanium (non Sport), we found that it also required the heat shield to be removed and it cannot be modified or re-installed. The reason this is the case for the # 75234 is because it's designed to fit more snugly against your...
view full answer...
- Recommended Hitch for a 2023 Ford Edge TitaniumThe best hitch for your 2023 Ford Edge Titanium is going to be the Curt Trailer Hitch Receiver item # C78KR. This hitch is custom fit and bolts to your Edge with included hardware. I really like this hitch because the crossbar mounts behind your rear bumper cover and the only portion visible is the 2" x 2" receiver. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. I have linked a couple of pictures below along with...
view full answer...
- Recommended Hitch for a 2023 Ford EdgeThe best hitch for your 2023 Ford Edge is going to be the etrailer Trailer Hitch item # e36RR. This hitch is custom fit and bolts to your Ford with included hardware. It fits all models of the 2023 Edge. The etrailer item # e36RR is made in the USA and weighs 38 lbs. It is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. I really like this hitch because the cross tube mounts behind your rear bumper cover leaving only the 2"...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Video by:
Jonathan Y
Test Fit:
Conner L
Test Fit:
Clayton O
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Greg
2/5/2024
Great