Gooseneck Hitch Ball for 2019 Ram 3500 with Factory Rail Kit

Question

Question:

Hey. I have a 2019 model Ram 3500. It does have the factory gooseneck in the bed. Do you have the hitch ball that would work with it? Thanks for your help.

asked by: Taylor

0

Expert Reply:

We sure do! For your 2019 Ram 3500 that's equipped with the factory puck system in the bed the Curt Ball and Safety Chain Loops Kit # C60618 will work perfectly. This kit includes the 2-5/16" hitch ball itself that will drop into the center puck along with the safety chain hookups that will attach to the front two pucks in the truck bed.

The system features a 30,000 pound towing weight capacity and comes with a limited lifetime warranty. I have attached a short video review below that you can also check out.

expert reply by: Chris R

0

click to enlarge

Answer 1

Yes, we do have the parts you need to convert your Big Tex trailer over to a 5th wheel hitch. You will want the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item #KPG5-R30IP. It has a 30,000 lbs capacity. The Ram Adapter item #KPG5-R30IP…

view full answer...

Answer 2

The latching mechanism of your gooseneck trailer coupler needs to wrap around the neck of the hitch ball and does not latch to the top of the ball your like your picture and description implies. You would not be safe to continue to tow like this as a…

view full answer...

Answer 3

For your 2016 Ram 3500 the Curt Gooseneck Ball and Chain Loops part #C60618 is the correct kit for your truck. If you have an Andersen Ultimate Connection part #AM3225 this hitch ball would attach to it and allow you to tow a fifth wheel trailer.

view full answer...

Answer 4

Yes, the Ram Factory Puck System has remained unchanged for the most part since its release therefore, the front pucks are different than those on the rear of your 2018 Ram 3500. The safety chain loops included with the Curt Ball and Safety Chain…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Gooseneck Hitch Ball for 2019 Ram 3500 with Factory Rail Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching