Recommend Parts to Convert a 30,000 lbs Gooseneck Hitch to a 5th Wheel Hitch

Question

Question:

I have a Big Tex 25GN 40 trailer with a gooseneck hitch. I also have a 2020 Ram 3500 that I use to pull it. I would like to convert them both over to a fifth wheel. Do you have the parts for the conversion? If so, can you provide the part numbers? I need 30k capacity.

asked by: Kathryn T

1

Helpful Expert Reply:

Yes, we do have the parts you need to convert your Big Tex trailer over to a 5th wheel hitch. You will want the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item # KPG5-R30IP. It has a 30,000 lbs capacity.

The Ram Adapter item # KPG5-R30IP replaces the inner tube only and can be bolted on to your Big Tex 25GN's existing outer tube. This adapter has a 4" diameter so it should fit but you will want to confirm before ordering.

If you end up needing to replace the entire coupler and not just the inner tube you will want the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter item # KPG5-R30.

To add a 30,000 lbs capacity 5th wheel hitch to your 2020 Ram 3500 you will want the, Curt PowerRide 5th Wheel Trailer Hitch item # C22ER. This is our highest capacity 5th wheel hitch and the 2 jaw locking system will provide you with a secure and comfortable ride.

You will need the Curt Semi-Custom Fifth Wheel Installation Kit item # C25BR to attach the Curt PowerRide. This is the only industry standard 5th wheel kit that is strong enough for a 30,000 lbs 5th wheel hitch. This is a semi-custom kit so it will require some drilling. Again this is the only option to achieve the 30,000 lbs capacity you are looking for.

If you do not already have one, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long item # C56000 to your 2020 Ram 3500. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient.

expert reply by: Jerred H

1

Answer 1

We sure do! For your 2019 Ram 3500 that's equipped with the factory puck system in the bed the Curt Ball and Safety Chain Loops Kit #C60618 will work perfectly. This kit includes the 2-5/16" hitch ball itself that will drop into the…

view full answer...

Answer 2

We offer the Reese 9485 as our own unique part number, #DT89MR, as well as the Curt #C60633 or the B&W #BWGNRK1320 which will all fit. If I personally had to choose between the two, I'd go with the B&W because I prefer the side-latch…

view full answer...

Answer 3

Yes, those are all the same. This is an older obsolete tire size. The modern size equivalent of the 20.5 x 8-10 tire is 205/65-10. The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item #AM3H340 you were looking at would be a great…

view full answer...

Answer 4

Safety chains are not required to be used with the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter item #C32DR. The chain connectors will not be in the way the bed protector supports will mount over the sockets.

view full answer...

Answer 5

Congrats on the new 5th wheel trailer! The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #325-GH-8045 you referenced fits a 1621 pin box so there is a strong possibility it is the one you will need. To confirm this is the correct part I will need…

view full answer...

Answer 6

Yes, you can use the Wesbar Adapter item #707250 to connect a 7-Way trailer connector to your Escapes 4-way connector. However, you won't be able to control the brakes or have an accessory line that keeps your battery charged. If you are…

view full answer...

Answer 7

Since you have a 4" round tube you need the Ram Gooseneck to 5th Wheel Trailer Coupler Adapter #KPG5-R30IP. This will replace the inner tube on your Big Tex 14GN. The #KPG5-R30 you were looking at comes with the same inner tube along with the…

view full answer...

Answer 8

For your Wicked Thumb BLVD 750 E-Bike, I recommend the Hollywood Racks Sport Rider SE Bike Rack item #HLY84FR. This is a frame mounted bike rack with an 80 lbs capacity per bike. It looks like your bike weighs 76 lbs with the battery installed. It is…

view full answer...

Answer 9

I checked with Rhino Rack and there is no way to attach the Rhino-Rack Universal Pioneer Platform Rack item #RR42115BF directly to your flush rails. You will need to add a set of crossbars using the roof rack by Thule which includes the following…

view full answer...

Answer 10

The Curt T-Connector Vehicle Wiring Harness item #C56291 is going to be the best option to add a custom fit connector to your 2020 Pilot. This plugs into existing wiring in your rear cargo area. It will provide you with a 4-flat connector. If your…

view full answer...

Answer 11

There's two different options to tow your 2021 Versa. If you have an automatic transmission it can't be flat towed and the only way to haul it behind an RV is to use a trailer or a dolly like the Roadmaster Tow Dolly with Electric Brakes item…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...