Gooseneck Ball Recommendation for 2016 Ram 3500 with Factory Rail Kit

Question

Question:

This is part I would need to install an Andersen Ultimate fifth wheel adapter hitch. I do own the Ram 3500. Thank you.

asked by: Laura

1

Helpful Expert Reply:

For your 2016 Ram 3500 the Curt Gooseneck Ball and Chain Loops part # C60618 is the correct kit for your truck.

If you have an Andersen Ultimate Connection part # AM3225 this hitch ball would attach to it and allow you to tow a fifth wheel trailer.

expert reply by: Jameson C

1

Answer 1

The latching mechanism of your gooseneck trailer coupler needs to wrap around the neck of the hitch ball and does not latch to the top of the ball your like your picture and description implies. You would not be safe to continue to tow like this as a…

view full answer...

Answer 2

We sure do! For your 2019 Ram 3500 that's equipped with the factory puck system in the bed the Curt Ball and Safety Chain Loops Kit #C60618 will work perfectly. This kit includes the 2-5/16" hitch ball itself that will drop into the center…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 6

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...