Which Torklift Tie Downs are Correct Fit for 1996 Ford F-250

Question

Question:

Hey there. I was just making sure these part number will fit my truck like they say they will I have a 96 Ford F-250 extended cab 8’ bed with NO running boards an for what I believe it’s an aftermarket hitch hidden hitch is the brand Will these or are there others to look at? Thank you

asked by: Chad P

0

Expert Reply:

Thanks for all the info on your 1996 Ford F-250! The correct tie downs are the part numbers # TLF2000 and # TLR3501 that you mentioned! This is the best option available for your truck so I would recommend it the highest.

expert reply by: Jameson C

0

Answer 1

Yes, the Torklift front tie down part #TLF2000 is the correct front tie down for your 1991 Ford F-250 long bed, 4x4, super cab, without running boards.

view full answer...

Answer 2

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item #TLR3503 only comes as a two pack. I recommend against just making you're own as you would be taking on all responsibility in the event of a camper tie down failure. Buying a new set…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Which Torklift Tie Downs are Correct Fit for 1996 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching