Draw-Tite Sportframe Trailer Hitch Installation - 2017 Mazda 3 Video

The problem you are experiencing is pretty common for vehicles that have seen a couple winters. What happens is the weld nuts get a bit of corrosion in them and that prevents the bolts from being able to thread. This makes it seem like the nuts are…

The Draw Tite hitch part #24914 that you referenced is a fit for your 2017 Mazda 3 hatchback with the appearance package.

Yes, the Torklift front tie down part #TLF2000 is the correct front tie down for your 1991 Ford F-250 long bed, 4x4, super cab, without running boards.

The owner's manual for a 2017 Mazda 3 does state not to tow a trailer and has nothing about the tongue weight capacity of the vehicle, but instead talks about not overloading vehicle with cargo. You should see a sticker in the door frame with…

Thanks for all the info on your 1996 Ford F-250! The correct tie downs are the part numbers #TLF2000 and #TLR3501 that you mentioned! This is the best option available for your truck so I would recommend it the highest.

The EcoHitch part #306-X7305 for your 2014 Mazda 3 hatchback is a really great choice for a trailer hitch and would also work really well with the Kuat Transfer part #KU74FR that you mentioned as well. This hitch would allow you enough clearance for…

If your e-bikes are on the very low end of that weight range, as in right at 40 lbs, there may be a trunk rack that is able to carry your e-bikes. It is also recommended that e-bikes be transported on your vehicle without the battery installed on the…

Hatch-mount bike carriers for your 2018 Mazda 3 Hatchback are available in 2-bike and 3-bike capacities. No 4-bike trunk racks are made since they would simply be too heavy for a car's sheet metal trunk or hatch. If you can get by with a 3-bike…

There is no cutting or trimming of the rear fascia/bumper of your 2014 Mazda 3 required to install the Draw Tite hitch part #24912. To see more install info check out the installation instructions I attached to the right. In the unlikely event of you…

I can confirm the Draw-Tite #24912 will fit your 2016 Mazda 3 iSport and included an install video for you to take a look at. That being said, this is a Class I hitch and is only rated up to 200 pounds of tongue weight. So depending on how much the…

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

When we installed the Curt Trailer Hitch Receiver part #C11377 on a similar 2017 Mazda 3 we found that the distance from the ground to the top of the inside edge on the receiver tube is 11-1/2". Since the trailer hitch has a 1-1/4" receiver…