EcoHitch Invisi Trailer Hitch Vs. Draw-Tite Class I Sportframe For 2019 Subaru WRX STI

Question

Question:

Hello, I was wondering how much does the ecohitch invisi trailer hitch receiver class 3-2inch for a 2019 subaru WRX STI actually weigh by itself? And how does it compare to the smaller and larger options? Thank you in advance

asked by: Kevin C

0

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver part # 306-X7257 weighs about 30 lbs. The good thing is the weight of the hitch itself does not count towards any weight capacities of your vehicle because it is attached to the frame. I have attached an installation video for your reference.

I recommend the EcoHitch because of it's 2" hitch receiver which is much more versatile when it comes to accessories like bike racks and cargo carriers. There are much more options for bike racks available with a 2" shank. It is also a concealed cross tube design so the only part of the hitch that is visible once installed is the 2" receiver through the rear panel for a nice clean OEM look.

The Draw-Tite Class I Sportframe Trailer Hitch Receiver part # 24968 weighs about 20 lbs and has a visible cross tube. This will give you a 1-1/4" hitch receiver. I have attached an installation video of this as well.

expert reply by: Heather A

0

click to enlarge

Answer 1

I went out to our warehouse to take a look at the EcoHitch Invisi Trailer Hitch Receiver #306-X7257 that you referenced and I measured a distance of only around 1-1/8 inches from the center of the hitch pin hole to the outermost edge of the receiver.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

EcoHitch Invisi Trailer Hitch Vs. Draw-Tite Class I Sportframe For 2019 Subaru WRX STI

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching