Does Brophy Turnbuckle TB38 Have a Weight Capacity

Question

Question:

Is this the same turnbuckle that is used in the Brophy Basic Camper Tie-down kit TDHP? What is the safe working load to the turnbuckle and the ultimate breaking strength?

asked by: Kurt H

0

Expert Reply:

Yes, the turnbuckle part # TB38 is one of the turnbuckles that comes with the kit part # TDHP which has a 3,000 lb capacity as a set. The 3,000 lbs would be a safe working load limit and not the break strength capacity which Brophy does not list.

expert reply by: Jameson C

0

Answer 1

When the HitchMate TruckStep XL part #HE4037 is extended all the way out and folded down it measures 26 inches. So it would stick out 6 inches past your tailgate.

view full answer...

Answer 2

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

Yes it does; I verified with Hopkins that their Endurance wiring harness will fit both a 2003 and a 2013 Ford F-250. There are actually two of them, one with a 6 foot harness and the other with a 10 foot harness, which you may want depending on where…

view full answer...

Answer 5

The difference is the part #TLD3113 fits the 2020 Ram 2500 and the part #TLD3112 fits the 3500 models. They are not interchangeable. Since you have a 2500 model you would want the TLD3113.

view full answer...

Answer 6

The Brophy Stake Pocket item #TDSF are made to fit any truck with stake pockets so I am confident they will your 1991 Ram W250. The easiest way to confirm they will work with your truck is to compare the dimensions of your stake pockets with the…

view full answer...

Answer 7

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TL44FR you were looking for your 2021 Chevrolet Silverado 2500 with the 8' Bed and fits both the models with a running board underneath the bed and those without the running boards so…

view full answer...

Answer 8

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL24JQ installs just outside the suspension springs on your 2022 Toyota Tundra as you can see in the attached photo.

view full answer...

Answer 9

Yes, the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.

view full answer...

Answer 10

For 53' of E-Track I recommend getting 2 of the etrailer #e42VR for Black Powder Coated or #e62VR for Galvanized. These kits come with 4 sections that are 8' long and while 2 of these kits will give you about 64' of E-Track, it's much…

view full answer...

Answer 11

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part #AL88289 could potentially affect the ride quality in a negative manner if you were to hit a dip or pot hole in the road while unloaded because of the internal…

view full answer...

Answer 12

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Does Brophy Turnbuckle TB38 Have a Weight Capacity

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching