Will the Brophy Camper Tie Downs # TDSF Fit a 1991 Dodge Ram W250?

Question

Question:

Will the Brophy universal stake bed pocket tie downs work with a 1991 Dodge Ram W250?

asked by: John B

0

Expert Reply:

The Brophy Stake Pocket item # TDSF are made to fit any truck with stake pockets so I am confident they will your 1991 Ram W250.

The easiest way to confirm they will work with your truck is to compare the dimensions of your stake pockets with the diagram I have attached below.

expert reply by: Jerred H

0

Stake Pocket Dimensions
(click to enlarge)

Answer 1

Yes, the Brophy Stake Pocket Mounted Camper Tie Downs #TDSF are a universal part that'll fit most full-size, non-dually pickup trucks with straight fenders and single-wall construction, so these'll work fine with your truck.

view full answer...

Answer 2

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part #AL88289 could potentially affect the ride quality in a negative manner if you were to hit a dip or pot hole in the road while unloaded because of the…

view full answer...

Answer 3

I checked with TorkLift, and their tie-downs will not fit your 2021 Toyota Tundra since you have a step underneath your truck bed, but depending on a couple measurements, you will still be able to use the Brophy Clamp On Camper Tie-Downs #HSAB. These…

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...

Answer 8

A junction box/7-way plug kit like Epicord #277-000141 or #HS381-9000 lets you convert the camper to match the 7-way RV blade type connector format. This avoids the extra connection points and potential trouble spots from using separate adapters.…

view full answer...

Answer 9

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 10

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 11

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 12

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Will the Brophy Camper Tie Downs # TDSF Fit a 1991 Dodge Ram W250?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching