Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
(339 reviews)
Price: $48.02
In Stock
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Item # TDHP
Retail:$80.99
Our Price: $48.02
You Save: 41%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (339)
- Q & A (0)
- Videos (3)
- Photos
- Used (1)
Brophy Accessories and Parts - TDHP
- Camper Tie-Downs
- Turnbuckles
- Bed-Mounted
- Brophy
- Standard Disconnect
- Powder Coated Steel
- Locks Not Included
- No Tension Indicators
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.
Features:
- Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck
- Works with Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, and HSCP)
- Sturdy steel construction
- Corrosion-resistant zinc-plated finish
- Kit includes:
- (4) 3/8" Hook-to-hook turnbuckles
- 4 S-hooks
- 4 Chains
Specs:
- Turnbuckle length:
- Extended: 12"
- Retracted: 7-5/8"
- Overall length when assembled (turnbuckle with chain and S-hook): 19-3/4"
- Weight capacity: 3,000 lbs
TDHP Camper Tie Down Hardware Package
Installation Details
Video of Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Camper Tie Downs Review
Today we'll be reviewing and showing you how the Brophy Stake Pocket Sliding Camper Tie Downs, part number TDSF, will fit on most trucks. These adjustable stake pocket tie downs will mount permanently in the stake tube of your truck for a tie down that is always ready to use. They have three removable spacer tabs that allow a custom fit for most pickups and a tab lock that anchors the tie down to the truck rail to prevent lifting and twisting. We'll begin our review by showing you how to install it onto our truck. To do this we'll slide the stake of the tie down into the stake pocket of our truck making sure that the black tab is facing the center of the truck bed. The spacer bars may need to be pried off if necessary to fit the size stake pocket of your truck.
Now with the tie down seated firmly in the pocket, we'll drill two 7/32-inch holes through the pocket about four inches from the top. Now for todays demonstration we will not be drilling and permanently securing this stake, but just showing you how to drill the holes and where. We'll then use the two lag bolts to thread into the holes that we just drilled putting pressure onto the stake. We'll now drill an 11/32-inch hole through the anchor tab and install the hex bolt. Now that we have our hole drilled through the bracket, we can move to the underside of the vehicle where you can see plastic paneling near the wheel well.
Removing this will allow you to open up a space for you to reach your hand up to thread on our washer and nut. You may need an extra set of hands when doing this part of the installation. Now with our camper tie down secured to our bed rail of our truck, we'll demonstrate how to tie your camper down with the tie down hardware package, part number TDHP, and we'll do this by taking the turn buckle, setting the chain on the hook on one end of the turn buckle, and then taking one of the s-hooks, putting the small end of the s-hook into the chain. We'll then take the other end of the s-hook and starting from the outside of the tie down which we'll slip into the hole, and with the camper positioned on to the tie downs you can simply turn the cam buckles which can either loosen or tighten to give you the best fit to your camper. Quick Tech Tip: Over-tightening the turn buckles may cause unnecessary stress to the camper and your truck.
That will complete todays review of the Brophy Stake Pocket Sliding Camper Tie Downs, part number TDSF.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000 lbs - Qty 4 - TDHP
Average Customer Rating: 4.5 out of 5 stars (339 Customer Reviews)
Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.by: Nancy01/28/2024
These ties downs solved an immediate problem when I bought my new truck bed camper. However, the trim piece on my 2017 Silverado truck bed couldn't withstand the pressure of the camper. The camper was stable but the tie downs moved when tightened. Then of course I forgot to untie and even though I caught it immediately, the trim on the truckbed lifted. I since have read that these ties downs are better for older model trucks. Thus I can say they worked as a immediate solution but it would be a safer system to get the tie downs that connect to the bottom of the truck.
by: Ben04/06/2024
Seems to be good quality. Got these to replace my camper's rachet straps since they're less bulky, stronger, and allow me to tighten the camper down to my truck bed's D-rings better than the rachet straps (since with my particular truck and camper it was difficult to get the access and leverage to truly tighten them as much I wanted, and as a result the camper would drift during travel)
by: Mario06/12/2021
Got here early in the a.m. and on time before heading on a 2 hours trip. Easy install. I hoped the chains would be longer, I had to use 2 longer chains because of the position of the eye bolts on the camper.
by: Robert07/21/2023
They shipped one turnbuckle.
Jenny N.
7/25/2023
Sometimes we do make a mistake. I am sorry that we did not send everything that was ordered. I will have our Customer Service team reach out to you.
by: Terry Lee08/20/2020
Easy install, quality hardware, great fit for my camper/ 2006 Dodge Ram 1500 quad cab truck combo. I would recommend this company and it’s quality products . Safety is a big concern and these tie downs are as safe as can be.
by: John03/07/2024
Easy do order from with good communication , products are best quality out there
by: Joe 03/21/2024
arrived on time and in excellent condit ion
by: Henry 01/23/2024
Very good and very easy to install
by: James 02/09/2024
They work great.
by: Rocco 01/18/2024
Great service fast and knowledgeable.
by: Mike 05/09/2023
Brophy tie downs were just what I needed. Shipment was delayed twice once it left your facility.
by: Andrew03/31/2018
Easy to use, strong materials used. Worked great in combination with the brophy pocket tie down system. Its camping time!
by: Drew 09/04/2022
Great quality and price.
Drew
9/5/2023
Excellent no issues.
Mike L.
10/26/2023
@Drew We're happy to hear that your # TDHP turnbuckles are still working well for you!
by: Francisco06/30/2023
Worked perfectly holds down my six pac camper just fine
by: Pat 03/20/2023
A must have for your camper if you are using the Brophy style tie downs.
by: Phill S.08/24/2015
The tie-down hardware package worked great. Nice and flexible, for matching the camper's layout. I might replace the S-hooks with threaded chain repair links, but for now, teh kit was complete and worked fine.
Phill S.
8/31/2016
The Tie-down brackets and tie-down hardware kit are working fine. They are a good, inexpensive solution for securing my camper to my pick-up.I appreciate the follow-up. You folks are great to work with.
by: Tom04/21/2023
Fantastic...........great quality.........great price.......great product........Thank YOU !!!!!!!!!!!!!!!!
by: Les 11/17/2023
Awesome quick shipping.
by: Jeremy09/13/2021
I paid extra money to have these turnbuckles delivered to me so I could go on a camping trip with my family. They came late and we had to cancel our camping trip. I tried calling customer service twice and no one answered.
Brooke M.
9/23/2021
Thank you for letting us know. Our customer service team should be reaching out to you in the near future.
by: Timothy 10/29/2022
Great selection, easy to shop.
One issue I noticed, is the quality of the screws used to mount the hardware.
It seems that with all the attention given to the actual hardware itself, it only makes sense to have better quality screws, etc.
They were cheap, not of high grade metal, and I had to go replace them.
I'd gladly pay a bit more, to get screws that are as good quality as the hardware.
All in all, though, I was satisfied...even if I had to source the screws myself at a Lowes store near me.
by: James06/08/2020
Have not actually used them yet, but they are sturdy and well positioned, and the installation was fairly easy, although I had to grind a very small (less than 1/8') off the bottom of the passenger side plate that goes inside the frame in order to get both bolts in. I don't have a camper yet, but may get the rear tie-downs, depending on size and weight of what I get. Will use bumper brackets for now. I did not think the bed mount type of tie-down would be enough for anything but a very light camper, and the through the bed into the frame type didn't appeal to me much. Not having to drill any holes was a plus, although I would have done it if necessary to get the strength I wanted. Although these tie-downs mount in a somewhat unusual way, I think they will be very functional, strong, and convenient.
by: nameless11/05/2014
I bought this set originally to buy a used camper from out of town and get it home. My plan was to buy something more permanent like Happijac. Once I put these on though, I decided they were plenty strong and would most likely work permanently so I'm going to run with that for a few months and see how they work. I am using spring loaded turnbuckles instead of these though.
They were easy to install and work with the factory bedliner that stops below the bed lip, no drilling is also a bonus.
My camper is a Hallmark popup 8ft long and weighs just under 1800 lbs.
by: Chad07/26/2023
Works perfect for what I needed
by: Jeff11/27/2016
Very strong brackets. Bolt holes could use "TWO" (with a little precision tolerance) slots to hold the bolts steady so the Nylock Nut doesn't twist and you have to use an end wrench.
Also, the brackets could be sold in a longer version of length so you can use a Heavier Duty Turnbuckle.
those are my only changes I would like to see. I really do like the versatility of the Brophy Tiedowns.
by: greg g01/25/2019
Overall, very simple and easy to install the Brophy tie downs. The hardware was honestly garbage.. weak grade that undoubtedly would not hold up to this weight and movement. Used heavy duty bolts to secure it to bed rails and stake pocket. So far, 200 miles driven in snow without much movement, but a bit worried about the longevity of the tie downs. This camper will stay permanently in the bed of the truck, so I will throw in some through bolts into the bed of the truck (peace of mind). Turn buckles seem to be good (other than a factory snag that sliced me open). So far happy with the product, could have been made a bit better for an extra cost; I definitely would have paid more for a two sided stake pocket bolt through. With only one tab for mounting to top side of bed rails this seems excessively weak.. do you see the gap in the stake pocket? It was seated when drilling and lagging it down. Started to turn under pressure.
25
339
Show More Reviews
See what our Experts say about this Brophy Accessories and Parts
- Will the Brophy Stake Pocket Mounted Camper Tie Downs Fit a 2007 Dodge Ram SRW 3500The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF work with most full-size, non-dually pickup trucks with straight fenders and single-wall construction, model years up to and including 2010. I have included a couple diagrams you can take a look at that include measurements so you can verify they will work with your 2007 Dodge Ram SRW 3500, as well as a video that touches on installation. These will also work with truck bed campers with an overall length up to 8'. You will also need...
view full answer...
- Camper Tie Downs For a 2500 lb 1993 Jayco 950 Camper on a 1992 Chevrolet 2500The Brophy Camper Hold Down Brackets, # HSSF, are a universal fit item that will work on most full-size trucks including your 1992 Chevrolet 2500. Some dual rear wheel beds and bed liners that block the top edge of the side rails can cause a problem with the installation of these hold downs. Be sure you verify that you will have enough room to install these hold downs without interference from the dual wheel well or a bed liner. These hold downs do not install in stake pockets, but wrap...
view full answer...
- Difference Between The Brophy Camper Tie-Downs HSAB And HSSF The Brophy # HSAB and # HSSF are essentially the same thing with the exception that the # HSAB has a small bend in it to make connecting to your turnbuckles easier. If you're still needing turnbuckles you can use part # TDHP.
view full answer... - How to Tell If Brophy Tie-Down Kit Will Fit 2012 Ram 1500 PickupI'm pretty sure that the Brophy Clamp On Camper Tie-Downs # HSSF will fit your 2012 Ram 1500 just fine since we have had others with similar model years get them to fit, but since these are universal tie-downs I don't have a way to confirm this on my end. With that being said, I'm attaching a photo showing the dimensions of these tie-downs for you to compare with your side rails to make sure that they fit properly. If they do then all you need to finish your setup is the Brophy Basic...
view full answer...
- Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum BedWe have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP. Although certainly...
view full answer...
- Will the Brophy Camper Hold Downs Fit on a 2007 GMC Sierra New BodyYes, the Brophy Camper Hold Down, # HSSF, will work on your 2007 GMC Sierra 1500 Crew Cab. This is a universal fit item and will support any size camper that is designed to fit your truck. The hold downs will wrap around the bed rail and mount inside the bed. If you have a bed liner that blocks the inside edge of the side rail, then you may need to modify the bed liner to fit this hold down. I have attached a photo showing how this hold down installs on a truck. You may also be interested...
view full answer...
- Brophy Camper Tie Downs that Fit 2017 Chevy Silverado 1500For your 2017 Chevy Silverado 1500 the part # HSSF would be the correct camper tie downs. We have confirmed with Brophy that these work on the newer Silverados. For a hardware kit you'd then need the part # TDHP.
view full answer... - Will Brophy Camper Tie Downs Work on 2020 Chevy Silverado 2500 Long BedYes, the Brophy camper tie downs part # HSSF that you referenced can fit truck bed that have plastic bed rail covers like your 2020 Chevy Silverado 2500. I attached a picture that shows them installed on a bed rail that has the covers like you mentioned. For hardware to attach the tie downs to the camper we have the # TDHP as well.
view full answer...
- Recommended Camper Tie Downs for a 2005 Ford F-250 4x4 Regular Cab 8 Foot Bed DieselNo, the stake pocket mount tie downs, # TDSF, are only good for campers up to 8 feet long. You would need camper tie downs # HSSF instead for your 2005 Ford F-250. I have included a link to a video review and the instructions to the right. I also recommend camper tie down hardware package # TDHP. You may also be able to install frame mount tie downs which would be ideal. I have included a link to the custom fit frame mount tie downs for the 2005 Ford F-250. You will need to use the drop...
view full answer... - Will Brophy Camper Hold Downs # HSSF Fit a 2009 Dodge Ram 1500 With a Bed LinerThe Brophy Camper Hold Downs, part # HSSF, will fit trucks with spray-in bed liners, but if it has a slide-in bed liner the bed liner will have to be trimmed away in the shape of the hold downs. The installation does not involve any drilling or modification to the truck bed. It is installed by tightening two bolts on each clamp. I am including a link to the installation instructions for the hold downs. You may also be interested in the Camper Tie Down Hardware Package, part # TDHP.
view full answer...
- In-bed Camper Tie Down Recommendations for a 2009 Dodge Ram 1500The Extang CargoCleats Truck Bed Tie-Down Anchors - Clamp On - 500 lbs - Qty 2 # EX1932, have a weight capacity of 500 lbs each. You will have to also make sure that the straps that you use also have enough strengths for the application. The tie-downs fit underneath the bed rails like in the video I have linked for you. Provided there is nothing in the way they could fit your 2009 Dodge Ram 1500, they are a universal fit, but will not work if you have the OEM bed rail cap installed. Since...
view full answer... - Camper Shell Hold Down Recommendation for a 2013 RamIn order to determine if the camper shell from a 1997 Dodge Ram could fit on a 2013 Ram you will need to measure the dimensions of both truck beds. If the dimensions are the same then the camper should fit on either truck bed. Without knowing more information it's hard for me to be any more helpful. If you need camper hold downs the part # HSSF and the hardware kit part # TDHP.
view full answer... - Spring Loaded or Rigid Turnbuckles for CR Brophy # HSSF Truck Bed Camper Tie-DownBrophy recommends using their rigid tie down hardware kit, part # TDHP, as their tie downs provide a small amount of flex.
view full answer... - Do Brophy Stake Pocket Mounted Camper Tie Downs Fit 1992 Ford F-250Yes, the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF will work in your 1992 Ford F-250. Keep in mind that with these tie-downs you will also need the Brophy Basic Turnbuckles with Hardware for Camper Tie-Downs # TDHP. I have added links to video reviews for you to check out as well of the Turnbuckles # TDHP and Camper Tie Downs # TDSF.
view full answer... - Which Brophy Camper Tie Downs Fit 2011 Chevy Silverado Long BedI do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2011 Silverado. The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your truck. You'd also need the hardware kit part # TDHP as well and you'd be set.
view full answer... - Will Brophy HSSF Tie Downs Fit 2004 Chevy Silverado 2500Brophy has told us before that their tie downs # HSSF are a fit for the 2004 Chevy Silverado so this kit would fit and work well. For the hardware kit to secure your camper to the tie downs you'd then want the part # TDHP.
view full answer... - Will Brophy Camper Hold-Downs Part # HSSF Fit 2001 GMC Sierra and Damage Truck Bed RailThe Brophy Camper Hold Down, part # HSSF, is a universal-fit item that will work in the vast majority of pickups except those with step-side beds; it will also not fit some double-wall or dually beds. It will work with your 2001 GMC Sierra with 8-foot bed. Installation instructions are included. The HSSF is a no-drill product that clamps to your bed rails. Included are protective neoprene pads for the clamps to safeguard your vehicle paint. Brophy also offers a similar product, # HSAB,...
view full answer... - Will the Brophy Camper Hold Downs # HSSF Fit on a 2012 Chevrolet Silverado 2500HD Long BedThe Brophy Camper Hold Downs, # HSSF, are a universal fit item that were designed to fit many different trucks, including your 2012 Chevrolet Silverado 2500HD Long Bed. We have not had the chance to test fit these hold downs on a 2012 Chevrolet Silverado 2500HD long bed at our facility yet, but we have successfully installed these hold downs on previous generations of GM trucks. We have also had customers install these hold downs on GM trucks that have the same body style as yours without...
view full answer...
- Camper Tie Down Recommendation for 2016 Chevy Silverado 3500 with Running BoardsOut of all the Brophy Camper Tie Downs we carry, I recommend the Brophy Clamp On Camper Tie Downs # HSSF. I recommend these tie downs as they can fit beds with spray in liners and are the most popular Brophy Tie Downs we offer. The part # HSCP are basically a chrome version of these which would also work. Both do not require drilling. These would fit and work well on your 2016 Chevy Silverado 3500. The turnbuckles you would need are the # TDHP. This will be the best budget friendly option...
view full answer... - Truck Bed Camper Tie Down Recommendation for a 2004 Ford F-150 with 6.5 ft Short BedThe Stake Pocket Camper Tie Downs, # TDSF, would be a good choice for your 2004 F-150 with 6.5 ft. Short bed, as long as your camper is not over 8 feet long. A better option, or if your truck camper is longer than 8 feet, would be to use the over the rail Camper Hold Downs, # HSSF. I installed a set of these and took some photos showing how they mount and how the pressure is applied when attached with the Camper Tie Down Hardware, # TDHP. For the ultimate tie down performance, frame mounted...
view full answer...
- How to Determine How Far the Camper Tie Downs HSAB Extend Past Bed RailThe width at the widest point on the Brophy Anchors part # HSAB is 6 inches. Installation of the hold-downs requires a minimum of 2" of clearance between the inside of the truck's sidewall and the inner lip of the sidewall. You will also need hardware package # TDHP.
view full answer...
- Will the Brophy Camper Hold Down Brackets # HSSF Fit a 1997 Ford F-350 Dually Truck With a CamperThe Brophy Camper Hold Down Brackets, part # HSSF are a universal-fit item that will work on most full-sized trucks, but the bed on your 1997 Ford F-350 Dually may interfere with installation of the hold downs. The brackets include the hardware for fastening the bracket to the truck, but we also offer hardware to attach the camper to the brackets, this kit is Brophy Camper Tie Down Hardware, part # TDHP. The kit includes 4 turnbuckles, 4 S-hooks and 4 lengths of chain. The camper will...
view full answer... - Brophy Camper Tie Down Recommendation for 2006 Ford F-350 DuallyYes, the # TDSF Brophy camper tie downs are a universal fit for full-size trucks and they will work great on your 2006 Ford F-350 dually. You'll also want the hardware kit part # TDHP to attach the camper to the tie downs.
view full answer... - Camper Tie Down Recommendation for 2002 Ford F-250The Brophy Camper Tie Downs part # HSCP would fit and work well on your 2002 Ford F-250 for carrying a slide in camper. Then for hardware you would want the part # TDHP to secure the tie downs to the camper itself.
view full answer...
Do you have a question about this Accessories and Part?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Video Edited:
Zack K
Video Edited:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Matthew K
Installed by:
Cole B
Updated by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mario
2/17/2023
Havent used the tie downs in a year. Hoping to use them again for a camping trip in March. Great product.