Correct SumoSprings for 2020 Mirada on Ford F-53 Chassis

Question

Question:

Needing sumo springs that fit my 2020 Mirada. What is available?

asked by: Mark

0

Expert Reply:

The correct SumoSprings that fit your 2020 Coachmen Mirada depends on what the GVWR is for your RV, but don't worry because we have a fit for all 2019 Ford F-53 options so you just need to choose from the list below (and/or let me know what model Mirada you have):

Front Axle
16K - 22K - # SSF-170-40-2
24K - 26K - # SSF-173-40-2

Rear Axle
16K - 18K - # SSR-184-40-1
20K - 22K - # SSR-180-54-1
24K - 26K - # SSR-183-54-1

Other upgrades you can add to your Class A RV are front and rear sway bars as well as a steering stabilizer. Typically we recommend upgrading these first prior to adding SumoSprings because you will see a bigger difference when upgrading the sway bars and stabilizer. If you choose to go this route too then you'll need to choose from the following:

Front Anti-Sway Bar
Bushing Kit - # RM-4139-127

Rear Anti-Sway Bar
Bushing Kit for 1-3/8" Diameter Bar - # RM-4139-300
Bushing Kit for 1-1/2" Diameter Bar - # RM-4139-125

Steering Stabilizer
GVWR 15.7K - 22K - # RM-RBK22-RSSA
GVWR 24K - 26K - # RM-RBK25-RSSA

expert reply by: Jon G

0

Answer 1

The stock rear bar of your 2014 Winnebago Vista built on a Ford 22k chassis has a 1-3/8inch diameter which we have a kit for all new brackets and bushings with the part #RM-4139-300.

view full answer...

Answer 2

In order to replace just the factory anti-sway bar bushings on a Ford F-53 Chassis you have a few options which will be based on the location of the anti-sway bar (front/rear) and the gross vehicle weight rating of the coach (15,700 lbs, 16,000 lbs…

view full answer...

Answer 3

I recommend having your suspension checked out to make sure there are no issues, but if everything is fine, suspension enhancement springs would help level your Itasca. I could not guarantee this will "fix" your lean but the SumoSprings…

view full answer...

Answer 4

I spoke with my contact at Roadmaster regarding any torque specs when installing the Bushing Kit #RM-4139-300 that you referenced. He said that for the bushings themselves there isn't a recommended torque spec because you really just want to…

view full answer...

Answer 5

Yes, since your 2019 Ford F-53 motorhome has a sway bar with a 1-3/8 inch diameter the bushing kit part #RM-4139-300 would fit.

view full answer...

Answer 6

For an 1-5/8" diameter bar on your 2004 Country Couch Magna I recommend Roadmaster Bracket for Anti-Sway Bar Split Bushings Item #RMB140 and Roadmaster Split Bushing for Anti-Sway Bar - 1-5/8" Item #RM205222-10. It is a good idea to check…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…

view full answer...

Answer 12

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...