Roadmaster Rear Anti-Sway Bar Installation - 2016 Ford F-53 RM-1139-149 Video

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

You are right, removing the u bolt nuts is a very important step to the install the Roadmaster Rear Anti-Sway Bar #RM-1139-149. The size of the U bolts will determine what size the nuts holding them in place are. If they are 3/4" in diameter U…

If you check out the install instructions for both the Roadmaster Sway Bars part #RM-1139-149 and #RM-1139-148 all of the torque specs are listed for each step of the install. There are enough of them at various steps of the install that it would be…

Yes, the rear anti-sway bar is the first and most worthwhile upgrade you can do on a motorhome. The 2020 Forest River Georgetown 31L5 would use the Roadmaster Anti-Sway Bar part #RM-1139-149 for the rear and part #RM-1139-148 for the front. It would…

Thanks for all of the info on your motorhome as that makes pick out the correct sway bars for it very easy. The correct rear sway bar for your 2018 Winnebago Vista on a F-53 18k chassis is the part #RM-1139-146. The correct front bar would then be…

The installation manual for the Roadmaster Rear Anti-Sway Bar #RM-1139-149 along with the Extended U-Bolt Kit #RM-590050-10 simply calls for a torque wrench and "general hand tools". When we installed this kit on the 2017 Ford F-53 we used…

In order to combat against wind on your 2020 Thor Axis 24.1 for better steering and stabilization, you'll want to invest into a rear anti-sway bar. Take a look at the: - Roadmaster Rear Anti-Sway Bar #RM-1139-147, This anti-sway bar is actually…

The torque requirements for leaf spring u-bolts depend on the diameter of the u-bolts that are being used. If the gross weight of your tandem axle trailer is 7,000 lbs, then you likely have two 3,500 lb axles. Typically 1/2 inch diameter u-bolts are…

Since you have an F-53 Chassis on your 2007 Four Winds Hurricane Class A Motorhome you'll need the following products: Front: Roadmaster Front Anti-Sway Bar #RM-1139-148. Rear: Roadmaster Rear Anti-Sway Bar #RM-1139-146. Steering Stabilizer: If…

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

I pulled the Roadmaster Polyurethane Bushing Kit #RM-4139-127 from our warehouse and took measurements for you. The metal bracket measures 4-1/2 inches center on center holes and 6-3/16 inches outside to outside. The linked photos show you the key…

I was able to confirm with Timbren that the Timbren Rear Suspension Enhancement System #TFRF53A is a confirmed fit on the rear axle of your 2019 Holiday Rambler 33c Vacationer on the Ford F-53 chassis. I've linked the installation we did on a…