What Causes Oblong Hitch Pin Hole On Equal-i-zer WDH
Question:
Hi, I have a this weight distribution system on my 2004 Ford F-150 and I pull a 26 foot camper with it. I have had this system the last 8 years and it is set up correctly for my application. My questions are: 1. I have noticed some slotting of the hole in the receiver towards the front of the truck, which is the one I use all the time, where the pin goes into the receiver. Im not sure what is causing this or if its a problem. 2. My receiver is factory installed for my truck and is a class V with WD of 9,950lbs and a tongue weight of 900lbs. My camper weighs 8000lbs loaded. There are two 5/8inch holes in my receiver for the pin to go through, and they are 2inch apart. I have been using the one towards the front of the truck. I cant find any information as to why there are two 5/8 pin holes in my receiver or which one I should use or if it even would make a difference. If I use the hole that would be closest to the trailer when connected, will that change any of my adjustments or add more tongue weight. The holes are only two inches apart so I dont know if it would change anything or not. Thanks,
asked by: Larry D
Expert Reply:
If you are having issues with the hitch pin hole becoming oblong on the shank for the Equal-i-zer Weight Distribution System part # EQ37100ET then you need to make sure the hitch pin hole on your trailer hitch is not also oblong as this would then cause that on the shank as well. If so then it will need to be replaced but your only option for this is a factory trailer hitch. The Equal-i-zer Weight Dist Shank part # EQ90-02-4100 will be needed as well if you have damage on the one you have now. In order to prevent this issue from occurring in the future you will want to use an anti-rattle device, the Gen-Y Anti-Rattle Clamp part # GY88XR which would work well and it helps with lining up the hitch pin hole each time.
In regards to the multiple hitch pin holes on the factory trailer hitch, I would reach out to the manufacturer to make sure both can be used but you should not need to reset the system in doing so.
Products Referenced in This Question
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Steel
- Fits 2 Inch Hitch
- Clamp Style
- Accessory Anti-Rattle
- Gen-Y Hitch
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Article: Trailer Hitch Receiver Sizes
- Shop: Griot's Garage Spray-On Ceramic 3-in-1 Wax - 1 Gallon
- Shop: Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
- Shop: Replacement Threaded Socket Mount for ARB Electric Coolers
- Shop: Deluxe Compartment Door Thumb Latch - 5/8"
- Shop: Roadmaster Quick Foot Assembly Tongue Jack Extender - 6" Extension - 5,000 lbs
- Shop: Trailer Hitch
- Q&A: Can You Convert to 2-1/2 Inch Shank From 2 Inch With Reese Weight Distribution Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer jack
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Curt Fifth Wheel Kit Installation - 2020 Ram 2500
- Search Results: safety chains
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Search Results: weight distribution hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Search Results: hitch
- Article: Trailer Tire Sizing
- Video: Choosing the Right Brake Controller
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Q&A: Choosing Between Air Lift Load Lifter 5000 or 7500 For 2018 Ram 2500 Towing 5th Wheel
- Search Results: 10~51
- Shop: Brake Controller
- Article: Ram Trailer Tow Prep Package
- Video: Manufacturer Review - Demco Autoslide 5th Wheel Trailer Hitch
on Weight Distribution Hitch
