How To Transfer Reese Base Rails To a 2019 Ford F-250

Question

Question:

I have Reece rails got new truck 2019 f250 will the curt mounts work with Reece rails Curt 16428

asked by: Jeff S

0

Expert Reply:

I do have an option for you but you cannot mix Reese Rails with Curt Frame Brackets. Therefore, you will need to use Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches part # RP50074 with the Replacement Hardware Kit for Reese 5th Wheel Base Rails part # RP58504 to complete your setup.

expert reply by: Conner L

0

Answer 1

The two rail hardware kits #RP58504 and the #RP58430 basically fit the rail kits. One includes lock nuts ( #RP58430 ) whereas the #RP58504 does not. But both are listed as fits for same rail kits. Worth mentioning though is #RP58504 comes with…

view full answer...

Answer 2

We have exactly what you are looking for to mount a 5th wheel hitch in your 2019 Ford F-150. The correct 5th wheel base rails and install brackets that fit your truck are the following: - Curt Custom Fifth Wheel Installation Kit for Ford #C93WR

view full answer...

Answer 3

The correct Reese base rail kit that fits your 1994 Ford F-150 is part #RP30035 and it comes with the base rails, mounting brackets, and all of the hardware that you need. If you happen to already have the base rails then you need the kit with the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...