Lift Kit for 2016 Ultra Lite Signature with Dexter 4,000 lb Capacity Torflex Axles

Question

Question:

We have a 2016 Ultra Lite Signature 5th Wheel. We are looking for a lift kit for tortion axles. They are Dexter L-N 121973577. The higher the better.

asked by: Lisa S

0

Expert Reply:

According to the research I did on your 2016 Ultra Lite Signature it has 4,000 lb Dexter Torflex torsion axles so the correct lift kit for it would be the part # K71-707-02 which would give it a 2-5/8 inch lift.

expert reply by: Jameson C

0

Answer 1

According to Lippert, the mounting nuts should be torqued to 120 ft-lbs for the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741.

view full answer...

Answer 2

The bolts that come with the Lippert lift kit part #LC382741 are 1/2 inch diameter.

view full answer...

Answer 3

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 4

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 5

To find out the exact distance, we went ahead and measured the distance between the bolt holes of the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741. When we measured, we found that the distance between the bolt holes is…

view full answer...

Answer 6

Yes, the open side of the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part #LC382741 faces the tire. I have attached a diagram for your reference.

view full answer...

Answer 7

I don't know what axles you have on your trailer but if you look at the axle tag it will tell you this. If you can't comprehend the axle sticker then just send me a photo of this and I will be happy to do that for you. There are a few…

view full answer...

Answer 8

As long as your Haulmark MC612BS has a 3500-lbs square torsion axle, you'll be able to use the #LC382741 to lift your trailer. If you've got a Torflex axle there are different kits available for this, so please let me know if that's the…

view full answer...

Answer 9

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Lift Kit for 2016 Ultra Lite Signature with Dexter 4,000 lb Capacity Torflex Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching