Will Trailer Hitch Fit a 2019 Mercedes Benz 170 WheelBase Sprinter Crew Van

Question

Question:

I was under the impression that the cargo and crew vans had the same underbody but were only differentiated by the seats and moldings inside. This hitch says it will not fit a Sprinter passenger van. Why would this be the case and if this one does not fit, can you recommend one that would? Thanks.

asked by: Chris B

0

Expert Reply:

As long as your 2019 Mercedes-Benz Sprinter 2500 doesn't have the 30-3/8" frame (measured outside to outside) then you can use part # 75549 if you have the standard bumper. I have attached an installation video of this trailer hitch on a 2016 MB Sprinter 3500 that you can reference.

If you let me know what you plan on using the trailer hitch for I can make additional recommendations as necessary.

expert reply by: Jon G

0

Answer 1

We do not recognize this connector that you have provided a picture for but we have a solution. We do not have an adapter to go between that plug and a 7-way connector. However you can create your own 7-way jack for your trailer to plug into. You…

view full answer...

Answer 2

As long as your 2018 Mercedes-Benz Sprinter 2500 with the 144 inch wheelbase is equipped with the standard bumper (not the step bumper) the Curt Class III Trailer Hitch #C13388 that you referenced will fit and work perfectly. This Class III hitch…

view full answer...

Answer 3

For your 2017 Mercedes Benz Spinter 2500 with the factory step bumper we have the Curt hitch part #13358 which is a confirmed fit for the long and short wheelbase models so it will fit and work well for you. The part #C13388 fits the versions of…

view full answer...

Answer 4

Curt does have a hitch that fits the 170 inch wheelbase versions of the 2017 Mercedes Benz Sprinter vans but it's not the part number you mentioned as it's actually the part #C13388. This requires frame drilling if the van is a 2500…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...