How Does etrailer Hitch Look Installed on 2019 Subaru Crosstrek

Question

Question:

Pictures - Any pictures yet? If not, when?

asked by: Jim

0

Expert Reply:

I have added some photos of how the etrailer.com Trailer Hitch # E98912 will look when installed on a 2019 Subaru Crosstrek. Though these are photos of the Curt Trailer Hitch # C13382, the two hitches are the same except for the etrailer hitch has a matte black finish compared to the gloss black finish of the Curt hitch, which basically just means the etrailer hitch has a bit more of a rugged look and isn't quite as prone to scratches.

As you can see by the photos, the etrailer.com Trailer Hitch # E98912 has a concealed crosstube so only the actual receiver is going to show. This is a Class III hitch with 2" receiver, 3,500 lb towing capacity, 525 lb tongue weight capacity, is made in the USA and comes with a lifetime warranty.

I have added a link to a video of the Curt hitch being installed on a 2019 Crosstrek for you to take a look at, and the etrailer hitch will be the exact same installation.

For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118467. It is also strongly recommended you use Dielectric Grease for Electrical Connectors # 11755 to help prevent any type of corrosion in your connector, which will increase its durability and extend its lifespan. I have added a link to a video of this harness being installed on a '19 Crosstrek.

I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball mounts - one with a 3/4” rise or 2” drop and the other with a 2-3/4” rise or 4” drop – along with a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip.

You can use the link to the help article on ball mounts I've added to determine if this kit will give you the correct amount of drop or rise.

expert reply by: Kyle S

0

click to enlarge

Answer 1

For your 2018 Subaru Crosstrek, I recommend the Curt Class III Receiver Hitch #C13382. This is an excellent Class III hitch that is confirmed to fit your vehicle and will provide a 2 inch receiver opening and a towing weight capacity of 3,500…

view full answer...

Answer 2

I took a look in the owners manual of your 2018 Subaru Crosstrek and found that it has a 200lb tongue weight rating, so while the etrailer Trailer Hitch #e98912 has a much higher 525lb tongue weight rating you will still be limited to the lower…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Curt #C13382 and etrailer #e98912 hitches for your 2022 Subaru Crosstrek have the same construction, capacities, and design, but the big difference is that the Curt hitch has the classic glossy finish while the etrailer hitch has a matte black…

view full answer...

Answer 6

In looking at the 2023 Subaru Crosstrek it is unchanged from the previous 2022 model year that the Curt Trailer Hitch Receiver #C13382 fits. I recommend installing the T-One Vehicle Wiring Harness #118467 so you will be able to add Auxiliary Lights…

view full answer...

Answer 7

For a Curt trailer hitch that is a confirmed fit for your 2019 Subaru Crosstrek we have the part #C13382 which I would recommend highly. It has a 2 inch opening which means more accessories are made for it and it has higher weight capacities as well…

view full answer...

Answer 8

I checked the owners manual of your 2021 Subaru Crosstrek and it is flat towable as-is which you can confirm if you check out the owners manual as well. You'd need to start with the Blue Ox base plate kit part #BX3622 which is a confirmed fit for…

view full answer...

Answer 9

If you're wanting a 2 inch hitch for your Crosstrek so you can use your existing bike rack, we have 2 options that I would recommend for you. If you don't mind The crossbar of the hitch being visible, the Draw-Tite Class III hitch, part…

view full answer...

Answer 10

I checked out all of the Class III trailer hitch receiver options for your 2018 Subaru Crosstrek, and the lightest hitch is a tie between the etrailer #e98912 and the Curt #C13382 with both of them weighing in just over 30lbs. Both of these hitches…

view full answer...

Answer 11

The hardware used to mount the etrailer #e98912 and Curt #C13382 is the same. Since the mounting locations on your 2021 Subaru Crosstrek dictate the type of washer used to secure the carriage bolts, and the length of the bolts, it is pretty common…

view full answer...

Answer 12

I have never heard of a receiver like the Curt Trailer Hitch Receiver #C13382 voiding a manufacturers warranty. That said do understand if your 2023 Subaru Crosstrek is only rated to tow 1,500lbs and you exceed that amount the factory warranty would…

view full answer...